Sam's fuse blocks :) Oh yeah baby!

Just wanted to share with all of you a photo of Sam's fuse blocks!
With all my 308s one of the first projects was to remove the factory fuse blocks and replace them with birdman blocks and have had nothing but positive results. Stumbled on a thread from last year discussing Sam's blocks and the craftsmanship . Just received my set a few days ago and the quality is vastly superior! ( Plus Sam is a REALLY good guy!) could not be happier with my purchase, and I can once again use the factory fuse covers.Going to make time to install them today.Thank you again my friend!


Have a set of birdman blocks up for grabs. Fits a 85 Euro QV. Cover the cost of postage and they're yours.
Image Unavailable, Please Login

 

Nice! I too bought Sams fuse block when he offered the group buy years ago and I'm ashame to say until now I still have not installed it yet. I know the quality is superb as it looks like he designed it to last forever.

 

Birdman fuse blocks have been spoken for.

 

Project complete.
Image Unavailable, Please Login

 

Was it plug and play or did you have to install new connectors?

 

Plug and play, very simple.

 

Where do I find Sam?

Need fuse blocks for 308GT4.

Keith

 

[email protected]

 

Sam's fuse block upgrade thread is in the Boxer forum section, here: http://www.ferrarichat.com/forum/boxers-tr-m/140216-boxer-fuse-block-upgrade.html

Read through that and you'll find instructions from Sam on how to contact him and all the discussions about these fuse boxes.

Does a 308GT4 use the same fuse boxes as the 308 GTB/GTS? For some reason I recall that they're different, so Sam's fuse boxes might not fit a GT4.

 

Me too
They are beautiful to look at though! One of my fuse covers melted a bit, and I need to replace it and the labels. It would be sacrilege to spoil Sam's craftsmanship with an inferior cover!
My TS-17s are still in the boxes, too - my bad. I'm still vacillating over tyre choice, and I've got to tweak the ride height a bit (it's a little low, and I've misplaced my C spanners).
I've been so busy at work, I need to book a space next Tuesday fortnight just to scratch my arse.

 

Add a LED SmartFuse and they would be golden.
Image Unavailable, Please Login

 

I'm running Bussman ID fuses which also glow if they blow, except for the 7 1/2 amp. No one seemed to carry them in Bussman.

 

Hello,
Sam makes the fuse boxes for all models,you just have to advise him what you want and he wires up accordingly.
From my own experience, the workmanship is superb and the difference unbelievable.
I would not hesitate in recommending this upgrade.
Tom

 

I replaced the Birdman fuse boxes with Sam's last year in my GT4 and it may have been my thread that the OP was referring to.

I'm very happy with them and I've also used LED fuses as suggested earlier. I haven't had one blow yet, so I don't know what they look like when they do.

One point to note is that I had a box of assorted blade fuses and these were very loose in Sam's connectors, but the LED fuses are a much better fit.

The LED on the fuses in the picture above stands proud of the main body, so the covers may not fit. The ones I've used have the LED within the body, so don't add any extra height.

Paul
Image Unavailable, Please Login

 

I totally agree. I just changed out my Birdman fuses to Sam's also. Another nice thing is that the original covers fit perfectly.
Image Unavailable, Please Login


Sent from my iPhone using Tapatalk