612 dash nightmare | Page 3 | FerrariChat

612 dash nightmare

Discussion in '612/599' started by m5shiv, Jun 14, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Ron, if you don't mind - PM me the VIN. I can look up the records.
     
  2. trygve11

    trygve11 Formula Junior
    BANNED

    Aug 20, 2008
    740
    Kansas City
    Full Name:
    Jason Hagen
    Ferrari doesn't use staples on their dash installs. When you re-do your dash, have the upholsterers use staples. Also, remember those long defroster vents are replaceable. It strongly recommend doing those while you are in there.

    My headliner completely dropped out on my 2006 612. I had documented the complete rebuild of the car on the forum and also the process of repairing. I strongly recommend commercial grade glue and padding.

    As for product, Leatherique only
     
  3. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    Anyone know the part number for the vent in front of the dash? Mine has a crack and I'm thinking about replacing it but haven't been able to locate the part number on the diagrams. Also, what it the process for removing it? Snaps in? Screws?
     
  4. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    66853300 & 67092900
     
  5. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    On my 355's they did for certain.
     
  6. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    Thanks Dave however those are coming up for the 599. I can't locate the part for the 612.
     
  7. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    The 599 and 612 share many of the same parts, Peter.
     
  8. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    Thanks Dave. I knew they shared some parts but I thought the 612 vent was one piece. I took a closer look and it is in 2 parts.

    Next question is how do you remove it?
     
  9. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    I don't know. I believe we refinished a few sets but we didn't remove them and I don't recall what the back sides look like.
     
  10. RonH

    RonH Formula 3

    May 29, 2016
    1,061
    Newport Coast, California
    Full Name:
    Ron H
    Peter why don’t you call Randy at RMT. He just did mine and so I am sure he will share. If you want, tell him I told you to call. I just saw him yesterday.

    Ron
     
  11. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    What's RMT? Not familiar with them.
     
  12. RonH

    RonH Formula 3

    May 29, 2016
    1,061
    Newport Coast, California
    Full Name:
    Ron H
    RMT Motorsports in Yorba Linda. (714) 340-3500

    They were the ones that did the dash replacement that I talked about earlier in this thread. They just replaced the vent piece you are talking about in my 612. The good news is that you can get it in about a week from Ferrari. The bad news is that they will charge you $800 for it.

    Randy is the owner of RMT and is well know down in the Orange County Ferrari community. He is very helpful and I am sure if you call him he will tell you how to take out the vent piece.

    Ron
     
  13. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    I can assure you both those can be purchased for much less than $800.00
     
  14. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    I haven't checked Ricambi on their pricing who is my usual "go to" for parts. I see that Eurospares UK has both parts for about $350.
     
  15. TrojanFan

    TrojanFan F1 Rookie
    Owner Silver Subscribed

    Nov 17, 2008
    4,887
    So. CA & NV
    Full Name:
    Peter
    Circling back to this thread, I'm looking for the RH & LH Under Windshield Plates. The plastic pieces which are the air vent on the top of the dash under the windshield. Dave listed them as parts 66853300 & 67092900 which come up for the 599. As he noted, many of the parts are interchangeable between the cars.

    Before I order anything, I am also seeing part number 80464800 & 80464900 listed for the 612. Are they the same part? Some sources have them available but they are much higher priced than the ones listed for the 599. Other sources show that they have been superseded by the part numbers listed for the 599.

    Any one know what is going on?
     
  16. RonH

    RonH Formula 3

    May 29, 2016
    1,061
    Newport Coast, California
    Full Name:
    Ron H
    Why don’t you call Randy at RMT motorsports. 714-340-3500. He just replaced them six months ago on my 612. I was just out there today having my annual servicing. I am sure Randy will be happy to tell you what the right part number is. Just tell him Ron with the 612 told you to call.
     
  17. trygve11

    trygve11 Formula Junior
    BANNED

    Aug 20, 2008
    740
    Kansas City
    Full Name:
    Jason Hagen
    I can tell you with certainty that the correct part numbers for the defroster vents on the 612 are:

    • 80464900 and 80464800
     
  18. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    Those are the superseded P/N's to what I posted.
     

Share This Page