Any interest on a pair of 348 black seats? | FerrariChat

Any interest on a pair of 348 black seats?

Discussion in '348/355' started by yelcab, Dec 13, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #1 yelcab, Dec 13, 2017
    I put OMP seats in so I have a pair of perfect 348 Black Leather Seats siting in the attic. Anybody interested ? 1994 Coupe version, built in seat belts. I will give a decent Stooge discount to fellow stooges.
     
    jrs likes this.
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,576
    The Brickyard
    Full Name:
    The Bad Guy
    #2 ernie, Dec 14, 2017
    Good luck with the sale Mitch. I'd take you up on it but I'm gonna be doing something similar to you here soon. Ditching the old seats and putting in some light weight buckets.
     
    jrs likes this.
  3. vvassallo

    vvassallo F1 Veteran
    Silver Subscribed

    Aug 4, 2006
    8,281
    Palos Verdes
    Full Name:
    Vince V
    #3 vvassallo, Dec 16, 2017
    Hey, what do you mean built-in belts? That's a Spider feature, isn't it?
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, Dec 16, 2017
    There is a built in lap belt, and the shoulder belt stays with the car.


    Image Unavailable, Please Login
     
  5. jrs

    jrs Formula 3

    Jun 14, 2003
    1,672
    UK
    Full Name:
    James S
    #5 jrs, Dec 19, 2017
    Which OMP’s have you put in ? What about mountings ? Any pics ? Thanks


    Sent from my iPhone using FerrariChat
     
  6. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #6 yelcab, Dec 20, 2017
    I put in the period correct OMP seats for Challenge cars. The mounting is custom. There is no standard mounting you can buy that fits so I made my own from 1/4 thick stock steel with cutting, drilling, and welding a bit. The driver side has OMP slider installed to make it easy to get in and out. The passenger side rarely has anybody so it is fixed. Picture will come later today.
     
  7. Triple Black

    Triple Black Karting

    Feb 8, 2014
    217
    Millington TN
    Full Name:
    David S
    #7 Triple Black, Dec 21, 2017
    They should fit my spider then? My original seat side bolsters are showing their age.
    Shoot me a price please.
     
  8. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #8 yelcab, Dec 22, 2017
    So this is what the OMPs look like in my car.

    The picture of the mounting points are at the front where you can see that the custom mounts I made comprise of 2 inch steel bars, cut and welded to right angle bars with pre made holes so the side-way bolts can go into the body. Then I locate the positions where the side mount holes are to go, drill holes, tap them with M8 x 1.25 size, screw in bolts and weld them in place. Finally, pop the seats on top, add washers and nuts. Done. I estimate the whole thing to take 8 hours.

    Note the OMP slider on the driver side, none on passenger side.


    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    Schatten likes this.

Share This Page