67 GTC Front Shocks | FerrariChat

67 GTC Front Shocks

Discussion in 'Vintage (thru 365 GTC4)' started by enio45, Feb 10, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    I have a customer that dropped off a 330 GTC for a full restoration of the car.

    Upon some inspection we noticed on side of the front shock mount was welded on to in an attempt to repair some damage most likely from not doing the recall . The other side did NOT have the recall plate welded on.

    Taking apart the suspension, it had 2 different shocks on the front.

    What I'm trying to determine is what is the correct part number for the front shock to determine which one
    we have is correct etc.

    I did a search on line and could not find a creditable part number ......

    Appreciate the advise.
     
  2. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    OK that looks pretty definitive to me :)

    Would that number be stamped on the shock as well?
     
  3. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    That one I can't help you with.

    When I helped take my Dino apart, I don't recall if the shocks had a part number on them.
    D
     
  4. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    82N1451 is the Koni part number
     
  5. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    yes, that is what i need.....looks like i have one that number and some other number and different looking shock!

    some kind of a CF on the front shocks !!

    thank u a lot for the help
     
  6. JayEff

    JayEff Karting

    Aug 8, 2017
    212
    Michigan
    Full Name:
    John
    Is it your plan to modify both shock towers to the recalled configuration?
     
  7. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,533
    Gilbert, AZ
    Full Name:
    Ed
    Yes, i need to repair the damage and create the orig look - then add the recall plate and weld that in.
     
  8. dm_n_stuff

    dm_n_stuff Four Time F1 World Champ
    Lifetime Rossa Owner

    There's a rebuilt set, with springs, on ebay right now, search the part #. (No personal involvement, just found them when I googled the part #)

    D
     

Share This Page