I removed the dah for retrimming and replacement of the vents at the top. Its a Right Hand Drive 599. Struggling with 2 connectors as I did not mark them when I took it off. a. On the Passenger airbag side there is a yellow connector for the airbag and along it is a small conenctor with a yellow tape with 2 wires . It comes out of the same branch as the airbag cable. SInce it has a yellow tape , I wonder if its an OPTIONAL airbag key switch connector that was not in use as my car has no passenger bag override feature. The conenctor is the same shape as the ones used for the speakers on the dash . b. This connector is on the safety / strengthning pipe of the dash board frame v close to the back of the speedo pod. Its a black connector with a PVC sheath on it. with a pink and another blue wire. Not sure if this too was a redundant connector or should it have gone down somewhere else to attach to some other sensor or part. Many thanks for any tips. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
