Bradan Challenge stradale paint

Sanded down and ready to install stripe decal.
Image Unavailable, Please Login

 

hood refitted to install stripe
Image Unavailable, Please Login Image Unavailable, Please Login

 

Stripe installed.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Setup in the booth and badge test fit.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Glasurit clear coat and setup to spray/blend.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Surface temp checked after preheat, it has to be 68 degrees or higher.
Image Unavailable, Please Login

 

Sprayed.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Clear
Image Unavailable, Please Login Image Unavailable, Please Login

 

Sanded down to spray more clear knocking down the hard edge between the decal and paint.
Image Unavailable, Please Login Image Unavailable, Please Login

 

Hand sanded and polished.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

Hill engineering skid plates.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login

 

It will rip right off with tape, I've seen people try double sided tape and window silicone.

 

The final touch! note one of the new emblems arrived with a defective finish.
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login