Not running right, SD light and rosy cat, diagnoses | Page 2 | FerrariChat

Not running right, SD light and rosy cat, diagnoses

Discussion in '308/328' started by johnk..., Jun 30, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. climb

    climb F1 Rookie

    Sep 19, 2006
    4,866
    Atlantic Beach Fl
    Full Name:
    Stuart K. Hicks
    Really stupid question..My rotor has a crack in it. It runs fine on cool days but once warmed up on a hot day it will break up and misfire ..could the rotor be the culprit? Asking because they are $300 a piece on my '80..

    thanks
     
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,833
    Cerritos, CA.
    Full Name:
    Mike
    Very possible that could be the culprit but with a the crack rotor, I would immediately replace it asit can disintegrate at high rpm and can ruin the cap as well. If you shop around, you should be able to find it cheaper way cheaper.
     
  3. spicedriver

    spicedriver F1 Rookie

    Feb 1, 2011
    3,859
    The rotor has a crack, or the cap has a crack ?

    Superformance sells these parts at a big discount. Note that they are not OEM Ferrari parts, but work quite well.

    http://www.superformance.co.uk/308/ignition.html

    Caps and rotors are regular maintenance items on most cars that used them.
     
    climb likes this.
  4. climb

    climb F1 Rookie

    Sep 19, 2006
    4,866
    Atlantic Beach Fl
    Full Name:
    Stuart K. Hicks
    The green plastic of the rotor arm. Looks like it was overtightened and put a hairline crack through it.
     
  5. 308 milano

    308 milano F1 Veteran
    Rossa Subscribed

    Jan 15, 2007
    5,350
    Montana
    Full Name:
    Kim
    Any updates?
    Ordered my new distributor rotors from Superformance June 30th.. still haven’t shown up. Called them yesterday and they said they sent them via postal service. Should see them in 17 days. Seems like nothing is straightforward or easy anymore..
     
  6. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    11,278
    CT
    Full Name:
    John Kreskovsky
    I got my rotors from Superfromance in about a week from order date. Installed and car runs as it should again. But I've had stuff from them take longer.
     
  7. 308 milano

    308 milano F1 Veteran
    Rossa Subscribed

    Jan 15, 2007
    5,350
    Montana
    Full Name:
    Kim
    Good to know. Thanks John. :)
     
  8. tf308

    tf308 Formula 3

    Dec 14, 2003
    1,168
    Virginia Beach
    Full Name:
    Tim
    So everything appears to be running on my car again too. New pick up sensors, new plugs, New caps, new rotors, and new plug extenders. I still noticed that it took a few minutes and a lap around the neighborhood before it finally seemed "normal." I did uncover that 4 of my extenders were shot.

    Now, I really wonder about the vacuum mechanism on the Digiplex units. What I mean is that I am uncertain how they actually work and adjust timing. I may have read that a ball moves across a slide with the vacuum to set the different curves. Maybe a winter sit causes one of the units to lag
    (ball doesn't move) and the timing doesn't exactly match until both are moving freely. This is just a speculation and would love to hear any input.
     
    308 milano likes this.
  9. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    11,278
    CT
    Full Name:
    John Kreskovsky
    Glad to hear your car is running ok again too, Tim.
     

Share This Page