f355 Emissions sticker? 2.7 or 5.2

Yes, all years are now available. This is just the label and would be applied to the OEM label plate. You could also put it directly on the heat shield if you so desire, but optimally would be on the plate to prevent too much heat on the underside of the label. Info on labels are below:

Matte Silver Polyester Label material

• The face material is 2mil thick and is weatherproof and water proof. This adhesive is an acrylic dispersion permanent adhesive. Minimum application temperature is +32 degrees Fahrenheit and has a service temperature range from -4 degrees Fahrenheit to +158 degrees Fahrenheit.
  
• Conforms well to uneven surfaces due the thickness.
  
• The label size is 6"x4" since the source didn't have 6"x3". The label is trimmed to size. After application, the label may need to be trimmed more due to slight variances in emissions label plate size.

Coating Spray

• High Temp Acrylic that is good to 200F.
  
• Provides protection to image and provides a nice finish. It is applied very lightly to prevent cracking when the label is applied or flexed.

 

Just found this thread. I am missing my emissions sticker as well, and it cost me .5 points at Concorso. Are you still doing 1995 2.7 stickers? If not, maybe you could send me the pic's etc that you used and some info on how to recreate your process. Appreciate any help.

 

Just saw this thread. Do you still have these stickers? I have a 95 which is missing the emissions sticker. I have the blank plate & the the Shell plate. If not, can you send me the picture you were working from & as much info you might have for me to do it myself. Any help will be appreciated. You can e-mail me directly if you want to @ [email protected]

 

I also need one for a 1995. Thanks.

 

Please PM me if interested in the stickers. I will provide more details in my reply.

 

Bought the emissions diagram from 355 rocket (thanks!) but still needed the smaller bar code sticker. So I found a '95 355 with a M2.7 to get a close up picture, and had some made. They look slightly different from the original, but I hope it gets me past the Concorso Italiano judging on Aug 25th. If so, I will sell a few to other 1995 355 owners if you are interested. See pics of the one I copied and the one I had made.
Image Unavailable, Please Login Image Unavailable, Please Login

 

My fat fingers included a pic of my '64 corvette seat "before" pic. Obviously not a Ferrari product, just another hobby project.

 

Looks nice, but barcode wouldn't be scannable since it appears to be a different format. If you want to send me the original F355 VEC image I can try to match the barcode and text to be more like the original sticker for you.

 

Yes! There is hope!!! I have been searching for a 160733 replacement emissions decal for my '95 GTB (May '94 Build) for a while. Mine looks like it was scalped. Rockit, I'm trying to figure out how to PM you, LOL!

Image Unavailable, Please Login

 

Have you tried clicking on his name and selecting "Start a conversation"?

 

Yup, figured it out immediately after I posted that, LOL! I was looking for a PM tile or Message tile.

 

I replied to your PM.

 

Hi there..do you still have my 95 stickers avail? My is literal toast and would love to get a new one.

 

Bump. Any more of these for MY 1995

 

Me too.

 

I have some, if anybody needs them

 

I replied to your PM.

 

Please PM me.

 

@Orangevespa Please PM me.

 

Sorry, don't know how to PM you, can you advise?

 

I sent you a PM. Please check your messages in FChat.

 

Anyone know a source for the plate (gold) underneath the catalyst sticker?

A source for the barcode that looks more OE?

 

The original finish is black anodized - over time with washing, heat and reaction to chemicals the anodizing can fade.

 

Are you referring to the sticker plate?



Image Unavailable, Please Login