my new AC knobs | FerrariChat

my new AC knobs

Discussion in '360/430' started by raywong, Aug 21, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
  2. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
  3. vrsurgeon

    vrsurgeon F1 World Champ
    Silver Subscribed

    Dec 13, 2009
    15,917
    Charleston, SC
    Full Name:
    Curt
    3d printing that you're going to share with all of us? ;)
     
  4. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
    no I bought it from a guy, yes they are 3d printed.
     
  5. The Nutsack

    The Nutsack Formula Junior

    Oct 7, 2014
    615
    Chicago
    Full Name:
    Mike
    I need these. I keep getting told the only way it to replace the entire unit for like $2000. The middle one is cracked so refinishing isn't an option. Do they just pull right off and get replaced?
     
  6. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
    yes they are just fiction fitted. All my knobs are cracked and I have been waiting for someone to make this!
     
  7. Stout

    Stout Formula Junior

    May 9, 2013
    259
    Helotes, TX
    Full Name:
    Victor
    3d printed? Really? That is so cool. I wish I had thought of that.
     
  8. Dave rocks

    Dave rocks F1 World Champ
    BANNED

    Nov 23, 2012
    16,047
    Orchard Park, NY
    Full Name:
    Dave Lelonek
    They look pretty good but I can see they are not exactly like the originals. The original are horrible plastic. We repair them all the time. If the tabs are broken or gone, just use a little silcone to hold them to the stem. Don't use glue as you want to be able to get them off should you need.
     
  9. raywong

    raywong Formula Junior

    Aug 29, 2004
    667
    Hong Kong
    Full Name:
    Raymond
    I have not really compared it to the original as the original ones are in pieces.
    I have tried to repaired them many times with epoxy, putty, sanding, primer, paint... it crack in other place soon after repair... I am storing them in a ziplock bag now just in case I want to sell my car in the future.
     

Share This Page