Cracked frame

Mine is welded and you can just barely see the edges of the bead as it was ground flush and feathered in before being painted. No crack, 1983 GTS 60k miles.

 

328gts euro 1989 both sides no gaps?
Image Unavailable, Please Login Image Unavailable, Please Login

 

Welds in different spots, more welds, less welds, crooked welds are all part of Italian factory labor done by hand. Plus or minus a little vino or an extra big lunch can vary results greatly.

Its part of the car's character. Live with it and embrace it.

 

good luck with the repair

 

I race Formula Ford cars for years. They are built with steel tube frames just like the 308. I would NOT pass on this crack.
I would grove it, weld it and finish it smooth. Then I would consider adding a small elongated diamond shaped patch over the crack.

 

My 1983 QV looks similar to the 328 and the 85.

If I run my finger across that area, I discern a very slight rise suggesting a well-feathered weld buried under the texture coat. ​

 

Mine has a very visible weld line, no effort to finish it smooth prior to paint, on both sides along that seem line. As was previously mentioned, it looks like a seem between two pieces, not a crack.

76 GTB

 

Image Unavailable, Please Login Here’s mine, 84QV

 

82 308i
Image Unavailable, Please Login