Bradan F355 major service | Page 2 | FerrariChat

Bradan F355 major service

Discussion in '348/355' started by BRADAN, Nov 27, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 4
  1. jimmym

    jimmym Formula 3

    Joined:
    Sep 30, 2008
    Messages:
    1,993
    Location:
    Northeast U.S.
    Full Name:
    Jim
    Exactly.:)
     
    jimmym, Nov 30, 2018
    #26
  2. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    i nevwr i dwrstiod... if the plenium was not suppoawd to be uaed as a shels why did the lord make it so flat and convienent?

    As far as stepping away for pics... the most likley scenario.... logic has nothing to do with it, folks tend to look for opportunity to dig, even artifical ones.
     
    Ferrarium, Nov 30, 2018
    #27
  3. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,278
    Location:
    CT
    Full Name:
    John Kreskovsky
    I too do like the Bradan threads. My previous posts was not meant to start a range war. It was little more that an observation that to me looked haphazard, that I've seen before, and constructive criticism. It looked as if someone walked away and left the tool there. And if it was forgotten and someone got under the car and it fell off and hit them it could cause serious injury. Workman's comp claim, BOOM.

    {edit} But it's Dan's shop and he can run it as he pleases.
     
    johnk..., Nov 30, 2018
    #28
  4. INTMD8

    INTMD8 F1 Veteran Owner Silver Subscribed

    Joined:
    Jun 10, 2007
    Messages:
    6,815
    Location:
    Lake Villa IL
    That all sounds like a series of events that’s quite a stretch of the imagination.

    Even if it was left there, little chance that it would even fall much less to the ground unobstructed by all the other parts and directly onto someone’s head.

    Ever walk into a lift arm? Ouch! I’d rather get beaned by that rubber covered impact any day :D
     
    INTMD8, Nov 30, 2018
    #29
    bergxu likes this.
  5. phrogs

    phrogs F1 Veteran Silver Subscribed

    Joined:
    Apr 13, 2004
    Messages:
    7,361
    Location:
    Kzoo Michigan
    Bitching just to *****.
     
    phrogs, Nov 30, 2018
    #30
    WATSON likes this.
  6. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #31
    WATSON likes this.
  7. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #32
    WATSON likes this.
  8. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #33
    WATSON likes this.
  9. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #34
    WATSON likes this.
  10. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #35
    WATSON likes this.
  11. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Nov 30, 2018
    #36
    WATSON likes this.
  12. Skippr1999

    Skippr1999 F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2009
    Messages:
    4,563
    Great threads Dan. I once found a mechanic’s wrench left in the engine bay of my 930 Turbo. It’s been my favorite wrench for years.
     
    Skippr1999, Nov 30, 2018
    #37
    bergxu and krazykarguy like this.
  13. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,939
    Location:
    WI
    Any ideas on what caused the impeller to break? Yikes....
     
    WATSON, Nov 30, 2018
    #38
  14. PhilB

    PhilB Formula 3 Owner Silver Subscribed

    Joined:
    Feb 17, 2004
    Messages:
    2,362
    Location:
    Southern New Jersey Shore
    Full Name:
    Phil
    And where the broken pieces went.......
     
    PhilB, Dec 1, 2018
    #39
    WATSON likes this.
  15. yelcab

    yelcab F1 World Champ Consultant

    Joined:
    Nov 29, 2001
    Messages:
    13,674
    Location:
    San Carlos, CA
    Full Name:
    Mitchell Le
    Amen Dan. Carry on.
     
    yelcab, Dec 1, 2018
    #40
    jimmym, WATSON, krazykarguy and 1 other person like this.
  16. SoCal1

    SoCal1 F1 Veteran Owner

    Joined:
    Jun 14, 2011
    Messages:
    8,636
    Location:
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    For all you weekend warriors and arm chair quarterbacks.
    Professionals mess up more times then most here have thought about much less attempted said repairs.

    A business is not a hobby, sometimes confused here.


    :)

    xo
     
    SoCal1, Dec 1, 2018
    #41
  17. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,367
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    IF the surface is horizontal, something will be set on it sometime in its life. It's whether or not that thing was left there when the horizontal surface goes to do its job that matters.

    Been there, set it down, removed it before re-admittance into service.

    sjd
     
    steved033, Dec 2, 2018
    #42
  18. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,278
    Location:
    CT
    Full Name:
    John Kreskovsky
    You guys are funny. One day someone will post that they took their meticulously maintained car in for service and when they got it back the plenum was scratched up they are pissed. I'll be the first to remind them the plenums are tool tables. :D
     
    johnk..., Dec 2, 2018
    #43
    bergxu and Dave rocks like this.
  19. steved033

    steved033 F1 World Champ Owner Silver Subscribed

    Joined:
    Apr 12, 2017
    Messages:
    10,367
    Location:
    Atlanta, GA
    Full Name:
    Steve D.
    The truly honorable shop would make it right if that were to happen, in the meanwhile I think I know where I left my Dewalt.

    sjd
     
    steved033, Dec 2, 2018
    #44
    RCKSTR and WATSON like this.
  20. WATSON

    WATSON Two Time F1 World Champ Owner Rossa Subscribed

    Joined:
    Sep 9, 2010
    Messages:
    23,939
    Location:
    WI
    Meh. Whatever. I have had my tools scattered on my plenums multiple times....and I am the one that refinished them.
    They look great BTW (the plenums, not the tools).

    Dan has been kind enough to help me via phone on more than one occasion.
    Great people are hard to find. Be happy we have Bradan posting pictures and sharing knowledge here.
     
    WATSON, Dec 2, 2018
    #45
    m5guy, PhilB, RCKSTR and 6 others like this.
  21. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Dec 3, 2018
    #46
  22. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Dec 3, 2018
    #47
  23. BRADAN

    BRADAN Two Time F1 World Champ BANNED

    Joined:
    Aug 29, 2009
    Messages:
    22,661
    Location:
    West Babylon, NY
    Full Name:
    BRADAN
    BRADAN, Dec 3, 2018
    #48
  24. Skippr1999

    Skippr1999 F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2009
    Messages:
    4,563
    Dan,
    How does a cam gear fence get bent ?
     
    Skippr1999, Dec 3, 2018
    #49
  25. RCKSTR

    RCKSTR Karting

    Joined:
    Sep 6, 2018
    Messages:
    103
    Location:
    Western Snow Mexican
    Looks like at one time someone used it as a surface to pry off off
     
    RCKSTR, Dec 3, 2018
    #50
    getragV8 likes this.
Page 2 of 4

Share This Page