Part number 111644. I tried all the major parts suppliers, ricambi, eurospares, scuderia, superformance ferrparts etc, etc... I am trying to put my F1 system back together and am missing 5 of these bolts. I may try getting some made, but would much rather have the originals. Aren't there a few member here that part cars out? In this picture, its the one with coarse threads. Image Unavailable, Please Login
Ken - that's got to be a standard, off the shelf (non-Ferrari) part. Try hydraulic supply houses. So, you are putting your car back to an F1?
Thanks, I'll give it a try. Yes, I've never driven the F1 version of our car, I'd like to have the option to be either at my preference. No plans to keep it one way or another, or to sell the 6spd parts. I also want to make sure everything works.
Ken - keep in mind that you need to do an actuator centering and self learn routine with an SD or equivalent. If you are not changing the clutch, you may also need to play with some parameters.
What diameter is it? If it is same as one of the Bosch fuel injection sizes they are available form a bunch of places. Some Bosch are fine thread and some not. That one is not. https://www.belmetric.com/high-flow-transfer-c-14_850_851_1498/?zenid=3230raaair2o73m1gp42m9bis1
Tomorrow I'll find out the threads and size. I assume as long as the holes that transmit the fluid are the same size, all should be well.
Sorry I didn’t see this sooner, If you haven’t found a set I have some for you if you want them, just pay shipping. They are not as pretty as new but would probably clean up fine. PM me if you want them. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Image Unavailable, Please Login Here Kenny you needs these instead can you say titanium ha ha https://www.ssautotech.co.uk/
