430 - Passenger door shuts only if slammed? | FerrariChat
Buy

430 Passenger door shuts only if slammed?

Discussion in '360/430' started by Bill ochrane, Feb 3, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #1 Bill ochrane, Feb 3, 2019
    My passenger door wasn't shutting. The window was going up and down on trying to shut but the door wouldn't catch and stay shut. Just a bump and back out from door frame. I got frustrated and slammed the door, and it stayed shut. If I slam the door it works fine, but embarrassing in public - LOL. Any know fix?
    Thanks
    Bill Cochrane
     
  2. cpep

    cpep Formula Junior
    Silver Subscribed

    Nov 11, 2017
    429
    new york
    Full Name:
    CHARLIE
    #2 cpep, Feb 3, 2019
    Try adjusting the latch on the door or the striker. Bolts may have loosened up a bit and it moved. May also just need some spray lube.
     
  3. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,916
    Isle of man- uk
    #3 mike32, Feb 3, 2019
    Do you still have the nylon sleeve on the striker, or has a bit come off and got stuck in the latch. You should be able to tumble the latch in the door edge with one finger if it is free enough
     
  4. whatheheck

    whatheheck F1 Rookie
    Owner

    Mar 27, 2006
    4,148
    Seattle, Wa
    Full Name:
    Dan L.
    #4 whatheheck, Feb 3, 2019
    Door alignment issues should be easy to figure out.

    Check the door hinge assembly for anything that may have come loose like door hinge pin or hinge mounting bolts.

    Check also door striker and door catch for loose mounting bolts.

    Hope that helps.

    Dan


    Sent from my iPad using Tapatalk
     
    f355spider likes this.
  5. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #5 Bill ochrane, Feb 3, 2019
    Thanks, I'll check all this and let you know.
    Bill
     
    whatheheck likes this.
  6. whatheheck

    whatheheck F1 Rookie
    Owner

    Mar 27, 2006
    4,148
    Seattle, Wa
    Full Name:
    Dan L.
    #6 whatheheck, Feb 3, 2019
    By the way I had the same issue when I had my 360 Spider and I determined root cause to be the door hinge pin that came loose and already halfway from coming completely off. It's a cheap design......

    Just push the pin back down and it's all good again.

    Dan


    Sent from my iPad using Tapatalk
     
  7. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #7 Bill ochrane, Feb 3, 2019
    The part on the car with the nylon sleeve is all good and tight. Not adjustable. I compared the doors and the driver's side works and when I open it, and use a ballpoint pen to simulate the door closing, the part in the door clicks and the paul turns. When I lift the door handle it moves to release and open the door. On the door that won't shut when I do the same thing, the part that moves and locks down does not lock down, Just returns to the open position.
    Not a good description I know. When I shut the door the rod with the sleeve on the car should go into the slot with the catch in the door causing the catch to lock down and hold the door shut. It's not locking in the closed position. looks like I may have to take the door apart.
     
  8. whatheheck

    whatheheck F1 Rookie
    Owner

    Mar 27, 2006
    4,148
    Seattle, Wa
    Full Name:
    Dan L.
    #8 whatheheck, Feb 3, 2019
    Looks like your door lock mechanism has gone bad.

    My car is an F430 and I have the service manual & it shows how to take the door locks apart / replace the door locks.
    Let me know if you need a copy and I will eMail you a copy.

    Dan
     
  9. whatheheck

    whatheheck F1 Rookie
    Owner

    Mar 27, 2006
    4,148
    Seattle, Wa
    Full Name:
    Dan L.
    #9 whatheheck, Feb 3, 2019
    Here you go, I printed that section for you.

    Dan
     

    Attached Files:

    f355spider likes this.
  10. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #10 Bill ochrane, Feb 3, 2019
    Dan, Thank you soooo much.
    Bill
     
    whatheheck likes this.
  11. whatheheck

    whatheheck F1 Rookie
    Owner

    Mar 27, 2006
    4,148
    Seattle, Wa
    Full Name:
    Dan L.
    #11 whatheheck, Feb 3, 2019
    You're welcome Bill. Glad I can help.

    Hope you get everything sorted out soon.

    Dan

    Sent from my SM-G955U using Tapatalk
     
  12. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,916
    Isle of man- uk
    #12 mike32, Feb 3, 2019
    As far i remember the striker is adjustable- if i remember correctly the 2 countersunk allen screws, screw into a steel backing plate which floats in the holes, this is your adjustment against the door seals.
    Otherwise the lock it self must float, but i think it is the striker that floats
     
  13. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #13 Bill ochrane, Feb 3, 2019
    Mike, I took both countersunk allen screws out, and the plate they screw into is not floating. I guess the adjustment is on the door side?
    Thanks
     
  14. Bill ochrane

    Bill ochrane Karting

    Oct 26, 2018
    202
    Galveston, Texas
    Full Name:
    William Cochrane
    #14 Bill ochrane, Feb 3, 2019
    UPDATE!
    Before I started taking the door apart, I started trying the key fob lock. It seemed like the fob was locking one door, while unlocking the other?
    I turned the battery off for a few minutes, and on.
    The locks started going crazy. On - off - on - off etc. Then stopped. Using the fob I lock and unlocked a few times. Went to the passenger door and it works fine now. Seriously. No mechanical adjustments were made to anything.
    Chalk another one up to the electrical Gremlins?
    Stay Tuned.
    BC
     
    Bob in Makiki likes this.

Share This Page