458 Carbon Fiber plenum restoration | FerrariChat

458 Carbon Fiber plenum restoration

Discussion in '458 Italia/488/F8' started by FerrariFab, Feb 21, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. FerrariFab

    FerrariFab Karting

    Jan 14, 2010
    161
    Inland Empire
    Full Name:
    CFI Designs
    picked these up from a local FCHAT member. These were off of a challenge race car so needed some TLC. We managed to remove the emblem which is not sold individually. We are checking now to see if the emblem from the scuderia will work if not we will paint or rechrome the original. I should mention the emblems are not supposed to be removed as they are held in with nuts and a sheet of carbon over the back side.will do the same upon reinstallation. Have yet ot decide if we will do matte finish again or something glossy.


    Image Unavailable, Please Login Image Unavailable, Please Login
     
  2. rumen1

    rumen1 Formula 3
    Owner Silver Subscribed

    Jun 23, 2012
    1,682
    Bulgaria
    You definately need to clear coat these. They will look MUCH better and also this is how they look from the factory if they are mounted on a regular 458.
     
  3. FerrariFab

    FerrariFab Karting

    Jan 14, 2010
    161
    Inland Empire
    Full Name:
    CFI Designs
    that is what im leaning towards.however with challenge front and rear bumpers and wing on my car the matte would be proper.
    Image Unavailable, Please Login
     
    Golattus likes this.

Share This Page