What rivets for attaching air conveyer on 348? | FerrariChat
Buy

What rivets for attaching air conveyer on 348?

Discussion in '348/355' started by FSM348, Feb 28, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. FSM348

    FSM348 Formula Junior

    Feb 13, 2017
    469
    Midwest
    Full Name:
    Dan Smith
    #1 FSM348, Feb 28, 2019
    I'm attaching the air conveyer to the underside of the front hood on my 348. This piece directs air from the intake vent on the hood to the hvac blower and is attached with aluminum rivets. I tried riveting it with some appropriate sized rivets I had on the workbench but the plastic conveyer wants to crack before the back end of the rivets seats correctly. Any ideas?

    Part number 6 on the following diagram.

    https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/348-group/348-1989-1992/front-hood.html
     
  2. Ferrarium

    Ferrarium F1 Veteran
    Sponsor Rossa Subscribed

    Jul 28, 2018
    5,728
    Central NJ
    Full Name:
    Eric
    #2 Ferrarium, Feb 28, 2019
    Pangea likes this.
  3. Pangea

    Pangea Formula Junior

    Mar 27, 2011
    442
    UK
    Full Name:
    Nick
    #3 Pangea, Feb 28, 2019
  4. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #4 Wade, Feb 28, 2019
    On Ricambi, it shows the rivets for the later cars. However, Item #6 is the same for all.

    https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/348-group/348/front-hood.html

    Check with Daniel to be sure.
     
  5. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #5 Wade, Mar 1, 2019
  6. Pangea

    Pangea Formula Junior

    Mar 27, 2011
    442
    UK
    Full Name:
    Nick
    #6 Pangea, Mar 2, 2019
    The picture Ive shown above were the original fittings on my hood. MY 91. Separate black washer and rivet. Interestingly nothing shown on the earlier parts diagram.
    I reused the black washers with new black rivets bought from Ebay.

    Image Unavailable, Please Login
     

Share This Page