Mondial T reliablity | Page 2 | FerrariChat

Mondial T reliablity

Discussion in 'Mondial' started by KATIEPEPI, Mar 3, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,575
    The Brickyard
    Full Name:
    The Bad Guy
    #26 ernie, Mar 28, 2019
    Last edited: Mar 28, 2019
    Pppfffffttttttt!

    Not a big deal with the front wheel or rear wheel bearings. Front bearings are the same as on early 348s, which are found on a Citron. Here is my diy thread on my 348 front bearings. https://www.ferrarichat.com/forum/threads/348-front-bearing-removal.241309/ You can probably find the bearings for $250 each, or less

    The Mondial t has the F119 engine, same as the 348, so if you need to find diy stuff and can’t find it in the Mondial section check the 348/355 section.

    As for the water pump, Ferraripilot’s (John) water pump is the shiznitz. It has a FAR superior impeller design to the original. I have one sitting in a box ready for my next engine out major.

    The fuel issues with the pumps are because of decaying dampening sleeves. Replace them with a set made out of Viton. I think Daniel has them for sale at Ricambi.
     
    WilyB likes this.

Share This Page