Restringing Ferrari 308GTB 1979 Window Cable | FerrariChat

Restringing Ferrari 308GTB 1979 Window Cable

Discussion in 'Technical Q&A' started by Floradora, Jun 17, 2019.

Tags:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Floradora

    Floradora Rookie

    Jun 17, 2019
    1
    Rome, Italy
    Full Name:
    Ruth Duncan
    #1 Floradora, Jun 17, 2019
    I am restoring a 308GTB, nearly finished, but I cannot figure out the stringing of the cable around the window motor gear wheel. Does one part of the cable go in a clockwise direction with the other part going counter clockwise? (As the gear wheel has '6 grooves' do I feed one part of the cable clockwise in 3 grooves and the other part counter clockwise in the remaining 3 grooves?).

    Would appreciate any feedback.
     
  2. dflett

    dflett Formula 3

    Jun 24, 2005
    1,603
    NY
    Full Name:
    David
    #2 dflett, Jun 17, 2019
  3. 2NA

    2NA F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 29, 2006
    18,214
    Twin Cities
    Full Name:
    Tim Keseluk
    #3 2NA, Jun 17, 2019
    You can skip the window accelerators if you replace the grease.
     
    waymar likes this.
  4. jmaienza

    jmaienza Formula Junior
    Rossa Subscribed

    Jan 8, 2009
    608
    Massachusetts
    Full Name:
    Joe
    #4 jmaienza, Jun 18, 2019
  5. DonB

    DonB Formula Junior
    BANNED

    Nov 11, 2003
    616
    Florida
    Full Name:
    Don Bartz
    #5 DonB, Jun 30, 2019
    The diagram is in the parts manual. Also, I found on my '79 GTB that there was NO dedicated ground wire from the door to the chassis. The door hinges were the only ground connections and they.re not designed to be a ground!

    As 2NA posted, replace the grease in the window motor (mine was concrete) with normal white grease, install grounding wires to the chassis, and you'll find your windows work pretty darned good!
     

Share This Page