Need help | FerrariChat

Need help

Discussion in '456/550/575' started by dersark_painclinic, Jul 5, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    After I took plenum out and cleaned, I carefully removed screws and collect in separate bags with labeled for each section. When I started assembling I noticed that there is one screw less for each side, there should be 14 screws for each side of plenum. I do not remember misplacing or losing, I checked parts manual and says total 28 which it should be. My other guess is that the missing screw is attached to other parts but I can not find any even looking at parts diagram or checking around for the parts I disconnected. Unfortunately it is not available for purchuse.
    Any body can send me a picture if the single screw on each side is holding a part to plenum please,
    Sark
     
  2. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
  3. ferraridriver

    ferraridriver F1 Rookie

    Aug 8, 2002
    4,134
    Bay Area Calif.
    Full Name:
    Dave
    Hi Sark,

    Look at the anti evaporation hose under the plenum covers. It's held in place by two clips in which you will find your missing screws

    Table 16, item # 25
     
    A_Christoofar likes this.
  4. dersark_painclinic

    dersark_painclinic Formula Junior

    Mar 8, 2005
    981
    Glendale, CA
    Full Name:
    Lazik Der Sarkissian
    Image Unavailable, Please Login
    Man, you are a life saver. The reason I could not find the screw because I covered it with blue tape so I don't lose it.
     
  5. wbklink

    wbklink F1 Rookie
    Silver Subscribed

    Sep 2, 2009
    3,312
    Los Angeles
    Full Name:
    Bill Karp
    good job Dave !
     

Share This Page