GT4 front light protection | FerrariChat

GT4 front light protection

Discussion in '308/328' started by Pero, Jul 20, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    Pero, Jul 20, 2019
    #1
  2. absostone

    absostone F1 World Champ Silver Subscribed

    Joined:
    Jul 28, 2008
    Messages:
    10,202
    probably only on a Euro car
     
    absostone, Jul 20, 2019
    #2
  3. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    That could be. One has a small crack on one side but still open and close as it should. Looking for one of these has been quite difficult.
    /Peter
     
    Pero, Jul 20, 2019
    #3
  4. absostone

    absostone F1 World Champ Silver Subscribed

    Joined:
    Jul 28, 2008
    Messages:
    10,202
    eurospares?
     
    absostone, Jul 20, 2019
    #4
  5. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    Tried but no luck there. Can't find part or part number. Two owners back on my car said it was added at factory. Could be, but I doubt it. Small detail but I like the prescence of more Bertone parts.
    /Peter
     
    Pero, Jul 20, 2019
    #5
    absostone likes this.
  6. kiwiokie

    kiwiokie Formula 3

    Joined:
    Aug 19, 2013
    Messages:
    1,539
    Location:
    Tulsa, OK
    Full Name:
    John McDermott
    Could you have it scanned and 3D printed?
     
    kiwiokie, Jul 21, 2019
    #6
  7. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    I have no knowledge about 3D printing and what can be done. I am now looking at other Italian cars, some other cars must have used them, Lambo, Maserati, Fiat, Alfa etc. I can only find the common "clam type snap on", but no folding covers. I like them with the Bertone brand on them and the vertical grid that lets some light out even when closed. Looking at it makes me think about Lambo....
    /Peter
     
    Pero, Jul 22, 2019
    #7
  8. absostone

    absostone F1 World Champ Silver Subscribed

    Joined:
    Jul 28, 2008
    Messages:
    10,202
    Maybe try Pasquale Coppola in Italy
     
    absostone, Jul 22, 2019
    #8
  9. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    New to me. Person or company?
    /Peter
     
    Pero, Jul 22, 2019
    #9
  10. absostone

    absostone F1 World Champ Silver Subscribed

    Joined:
    Jul 28, 2008
    Messages:
    10,202
    absostone, Jul 22, 2019
    #10
  11. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    Aaaaah, ok. I'll send them the pictures and ask if they have seen them before.
    Thanks!
    /Peter
     
    Pero, Jul 22, 2019
    #11
  12. sltillim

    sltillim Formula 3 Silver Subscribed

    Joined:
    Nov 22, 2009
    Messages:
    1,724
    Location:
    San Diego
    sltillim, Jul 22, 2019
    #12
    absostone likes this.
  13. Pero

    Pero Formula Junior

    Joined:
    Apr 22, 2011
    Messages:
    825
    Location:
    Sweden
    Full Name:
    Peter R
    I have been looking at X/9 before, there are so many versions of them, but haven't seen any pictures of the fog lights, until now! Scrolling all the way down is a perfect photo of the, as they say, RARE Nuccio Bertone fog light. Some X/9 Special had it, some didn't. So someone took a Carello/Nuccio Bertone fog light and put them on my GT4, same size. Mystery solved! A unique Bertone design.

    Thank you Spencer for solving the fog light mystery for me!
    /Peter
     
    Pero, Jul 22, 2019
    #13
    sltillim and absostone like this.
  14. sltillim

    sltillim Formula 3 Silver Subscribed

    Joined:
    Nov 22, 2009
    Messages:
    1,724
    Location:
    San Diego
    There are so many parts bin pieces around! Especially with the X1/9 there have to be a lot of overlapping parts.
     
    sltillim, Jul 23, 2019
    #14
    Pero likes this.

Share This Page