360 Modena - Removal of seat belt interior pillar and cross section head liner? | FerrariChat

360 Modena - Removal of seat belt interior pillar and cross section head liner?

Discussion in 'Technical Q&A' started by Dviti, Aug 12, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Dviti

    Dviti Rookie

    Jul 24, 2019
    2
    Full Name:
    David Viti
    I dinged my roof on my 2000 360 Modena and I have a paintless dent remover coming to repair it. I would like to remove the interior panels so that he has access to the roof panel. The dent is so minor and it’s right over the drivers head and above the cross bar section that goes in between the seat belt pillars. Would anyone be able to tell me how to remove the seat belt pillars and the trim part that is in between the two pillars?

    Thank you in advance!


    Sent from my iPhone using Tapatalk
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,661
    San Carlos, CA
    Full Name:
    Mitchell Le
    The good ones can pull out the dents with a vacuum pump.
     
  3. Dviti

    Dviti Rookie

    Jul 24, 2019
    2
    Full Name:
    David Viti
    Yes, you are correct. The person coming to repair the dent said that they have more control from pushing behind the panel. This is why I thought if it was easy to provide him access I would get it ready for him.




    Sent from my iPhone using Tapatalk
     
  4. Mimmo Blue

    Mimmo Blue Formula Junior

    Apr 17, 2018
    322
    Stoney Creek, Ontario, Canada
    Full Name:
    Dom
    Seat belt pillars are held in with 4 serrated plastic clips. Just pull them straight out
     
  5. Bob in Texas

    Bob in Texas F1 Rookie

    Apr 23, 2012
    2,665
    Just East of Weird
    Full Name:
    Bob
    See this video...



    Sent from my iPad using Tapatalk Pro
     
    billy.gif likes this.

Share This Page