Ignition Trim | FerrariChat

Ignition Trim

Discussion in '308/328' started by sherrillt, Oct 13, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,053
    Northern Virginia
    Anyone have a source or have an ignition trim donut ring for a 89 328GTS? I tried the typical sources (Eurospares, Ferrparts, etc).

    Recently had my car serviced and suspect someone lifted it at the shop, naturally the shop knows nothing about it.
     
  2. Milkshaker0007

    Milkshaker0007 Formula Junior

    Sep 22, 2012
    428
    Midlands,uk
    Full Name:
    Paul
    Hi
    I believe eurospares had a 328 in there they were stripping for spares about 3 weeks ago?

    Also a guy in Australia on EBay is stripping parts off another 328, may be work an email/phone call
     
  3. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,053
    Northern Virginia
    Eurospares said their car was picked through - nothing available. ferrparts said there is a repro out there that is awaiting another production run.

    I’ll scan eBay - thanks
     
  4. Ferraridoc

    Ferraridoc F1 World Champ
    Owner Silver Subscribed

    Jun 20, 2012
    16,070
    Gold Coast, Aust.
    Full Name:
    Patrick
    Try Superformance - I think they have them
     
  5. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,053
    Northern Virginia
    Scanned their site. I do not see Ferrari Parts?

    can you post a link?
     
  6. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,828
    Isle of man- uk
    Superperformance uk, then look for V8 and select your model
     
  7. ragtop1

    ragtop1 F1 Rookie
    Silver Subscribed

    Nov 11, 2006
    4,934
    Ontario
    Full Name:
    Larry Warren
    they are on backorder. I've been waiting for 4 months. :(
     
  8. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,143
    Houston, Texas
    Full Name:
    Bubba
    Well the two clip retainers break and they go adrift....mine was glued in for awhile and is now long gone....

    Unobtainium Supply should do one.
     
    chas-3 likes this.
  9. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,828
    Isle of man- uk
    Out of interest what is the pt number as no idea what it is
     
  10. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    If I can borrow one to use as a mold pattern I'll be happy to add them to Unobtainium's product list.
     
    chas-3 likes this.
  11. ragtop1

    ragtop1 F1 Rookie
    Silver Subscribed

    Nov 11, 2006
    4,934
    Ontario
    Full Name:
    Larry Warren
    #11 ragtop1, Oct 14, 2019
    Last edited: Oct 14, 2019
    Image Unavailable, Please Login
    Ignition Lock Plastic Surround part # 60164001
    Supersedes: 60164009
    (308: GTB/S, GTBi/Si & QV); (208: 1982, 1989 Turbo); (288: GTO)

    £1.90
     
    Thomas Magnum likes this.
  12. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    OH, didn't recognise them from your description. Those are already in the works!!

    Brian Keegan was kind enough to send me a set.

    Will be a month or so tho. Am planning on starting on the molds for them just after Halloween.
     
    Thomas Magnum likes this.
  13. ragtop1

    ragtop1 F1 Rookie
    Silver Subscribed

    Nov 11, 2006
    4,934
    Ontario
    Full Name:
    Larry Warren
    Can you make them as cheap as Superformance ? selling for £1.90 plus shipping is $2.50 USD plus ship
     
  14. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
  15. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,053
    Northern Virginia
    Yes - I need the donut as pictured above. I think it fits over/a top the plastic surround.
     
  16. Ferraridoc

    Ferraridoc F1 World Champ
    Owner Silver Subscribed

    Jun 20, 2012
    16,070
    Gold Coast, Aust.
    Full Name:
    Patrick
  17. sherrillt

    sherrillt Formula 3
    Rossa Subscribed

    Jan 1, 2009
    1,053
    Northern Virginia
    Gasket 62320300
     
    Rosey likes this.
  18. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
    Have you checked under the seat and inside the door drawers?
    Could have fallen off and landed anywhere.
     
  19. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,828
    Isle of man- uk
    That would be fun to make from an alloy bar- not for £1_90 through
     
  20. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,143
    Houston, Texas
    Full Name:
    Bubba
    I need one also, so post back here once you have a run of them!
     
  21. ragtop1

    ragtop1 F1 Rookie
    Silver Subscribed

    Nov 11, 2006
    4,934
    Ontario
    Full Name:
    Larry Warren
    I contacted Superformance re: backorder status of the ignition ring. They have no idea when the part will be available from their supplier.
     
    sherrillt likes this.
  22. Rosey

    Rosey F1 Rookie

    Nov 5, 2015
    3,587
    Australia
    Full Name:
    Mark R
    How often do you hear that response !!
     
    sherrillt likes this.
  23. thorn

    thorn F1 Rookie
    Silver Subscribed

    Aug 7, 2012
    3,322
    Tallahassee, FL
    It's too bad that Superformance has no way of contacting the supplier and making an inquiry as to a delivery date. /s
     
  24. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    Hmm, I can list a really really cheap price for something I don't have.also ;) ?

    Seriously tho, no, I can't match that price. My process Is just too labor intensive, and I will have to amortize the ~2 days work it takes to make a mold that will only produce 1 set at a time, & is good for only about 20 sets then has to be remade..
     
  25. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,017
    Groton, MA
    Full Name:
    Verell Boaen
    re: 62320300 GASKET FOR RING NUT

    As for the ring nut set, I'll be happy to make them if I can borrow one in good condition to use as a mold pattern. This use will not affect the part in any way. When I'm done I'll return it along with a new one.
     

Share This Page