Anyone have a source or have an ignition trim donut ring for a 89 328GTS? I tried the typical sources (Eurospares, Ferrparts, etc). Recently had my car serviced and suspect someone lifted it at the shop, naturally the shop knows nothing about it.
Hi I believe eurospares had a 328 in there they were stripping for spares about 3 weeks ago? Also a guy in Australia on EBay is stripping parts off another 328, may be work an email/phone call
Eurospares said their car was picked through - nothing available. ferrparts said there is a repro out there that is awaiting another production run. I’ll scan eBay - thanks
Well the two clip retainers break and they go adrift....mine was glued in for awhile and is now long gone.... Unobtainium Supply should do one.
If I can borrow one to use as a mold pattern I'll be happy to add them to Unobtainium's product list.
Image Unavailable, Please Login Ignition Lock Plastic Surround part # 60164001 Supersedes: 60164009 (308: GTB/S, GTBi/Si & QV); (208: 1982, 1989 Turbo); (288: GTO) £1.90
OH, didn't recognise them from your description. Those are already in the works!! Brian Keegan was kind enough to send me a set. Will be a month or so tho. Am planning on starting on the molds for them just after Halloween.
My 89 328 key surround looks much more like a donut than the one pictured above. Image Unavailable, Please Login
Have you checked under the seat and inside the door drawers? Could have fallen off and landed anywhere.
I contacted Superformance re: backorder status of the ignition ring. They have no idea when the part will be available from their supplier.
It's too bad that Superformance has no way of contacting the supplier and making an inquiry as to a delivery date. /s
Hmm, I can list a really really cheap price for something I don't have.also ? Seriously tho, no, I can't match that price. My process Is just too labor intensive, and I will have to amortize the ~2 days work it takes to make a mold that will only produce 1 set at a time, & is good for only about 20 sets then has to be remade..
re: 62320300 GASKET FOR RING NUT As for the ring nut set, I'll be happy to make them if I can borrow one in good condition to use as a mold pattern. This use will not affect the part in any way. When I'm done I'll return it along with a new one.