355 - Minor cosmetic modifications chrome heat shield | FerrariChat

355 Minor cosmetic modifications chrome heat shield

Discussion in '348/355' started by ruey220, Oct 16, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #1 ruey220, Oct 16, 2019
    Ga68_ likes this.
  2. Ferrarium

    Ferrarium F1 Veteran
    Rossa Subscribed

    Jul 28, 2018
    5,631
    Central NJ
    Full Name:
    Eric
    #2 Ferrarium, Oct 17, 2019
  3. Jackie and bill

    Jackie and bill Formula Junior

    Nov 29, 2014
    795
    GB
    Full Name:
    William
    #3 Jackie and bill, Oct 17, 2019
    Yea I had the same idea for mine a good few years back. However mine is the complete heat shield in Polished aluminium.
    It does look great through the grill doesn't it :)
     
  4. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #4 ruey220, Oct 17, 2019
    How were you able to do the whole heat shield complete?
     
  5. Jackie and bill

    Jackie and bill Formula Junior

    Nov 29, 2014
    795
    GB
    Full Name:
    William
    #5 Jackie and bill, Oct 17, 2019
    Was not to difficult, it was fabricated for me in an engineers workshop.
    As well as looking great through the grill, it looks great from inside the engine bay under the air boxs.
     
  6. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,532
    Sydney
    Full Name:
    Ian Riddell
    #6 Qavion, Oct 17, 2019
    Isn't the point of the standard heat shield to stop the air boxes getting hot? Or did you put some reflective insulation on the bottom of the air boxes?
     
  7. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #7 ruey220, Oct 17, 2019
    The shield I got is a heat shield for Truck exhaust stacks, so it serves the same purpose. I also left the original one below, so it is double insulation.

    I also have on order BMC OTA carbon enclosed air filters that I am going to be replacing the airboxes with, to help eliminate heak soak which the airboxes do as well, since the factory ones are metal. It should increase flow and keep intake temps lower. I recall that every 10 deg in temperature is almost 1hp.
     
    Qavion likes this.
  8. Qavion

    Qavion F1 World Champ
    Silver Subscribed

    Feb 20, 2015
    11,532
    Sydney
    Full Name:
    Ian Riddell
    #8 Qavion, Oct 17, 2019
    Ah, my mistake.. I thought the shiny bit was your muffler and that you'd removed the old heat shield.
     
  9. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #9 ruey220, Oct 17, 2019
    Oh no problem. But that was the purpose to look like the exhaust since on this model you can't see it. On the 360 and 430 you can see the exhaust.
     
    Qavion likes this.

Share This Page