Seeking 330 GTC info: air vent duct | FerrariChat

Seeking 330 GTC info: air vent duct

Discussion in 'Vintage (thru 365 GTC4)' started by PFSEX, Nov 13, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. PFSEX

    PFSEX Formula Junior

    Jun 30, 2006
    843
    Las Vegas
    Full Name:
    John Ratto
    HI guys

    I have been assisting in an in-garage 330 GTC restoration for what seems like forever (about 5 years).

    We are finally getting close.

    We are looking for the stiff black air duct (about 4" diameter) that runs from the fans (through the fender wells) to the heater cores.

    Any help on providing a source for this duct would be greatly appreciated.

    Thanks!!
     
  2. barchetta

    barchetta Formula Junior
    Silver Subscribed

    Nov 5, 2003
    859
    John,

    A couple of folks who you may want to consult with: Tom Yang (he is disassembling a 330GTC for paint right now), Tom Shaughnessy or Motion Products in Neenah Wisconsin.
     
  3. christc

    christc Formula Junior

    Mar 3, 2013
    444
    Germany
    I do not know for the 330 Gtc but for the 250 Gte I used as recommended by Tom Yang and others early Corvette air hoses. If I remember right they have the mentioned diameter and come from a C1.

    BR
    Christopher
     
  4. prance

    prance Formula Junior

    May 4, 2005
    513
    Agoura Hills
    Full Name:
    morris
    You're looking for 80mm paper duct. Everyone has it. Try Newco products. Your car is too late for neoprene.
     
  5. daytonaman

    daytonaman Formula Junior

    May 1, 2007
    959
    Australia
    Full Name:
    howard pigdon
    I think sama as daytona and 246
    superformance should have it too
     
  6. steve meltzer

    steve meltzer Formula 3

    Sep 18, 2004
    1,036
    with Enzo 8995
    I used the Corvette C1 ducting on my GTC. steve
     

Share This Page