355 - Mounting Recaro Pole Position Seats to 355 | FerrariChat

355 Mounting Recaro Pole Position Seats to 355

Discussion in '348/355' started by cheungchoyui, Dec 5, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cheungchoyui

    cheungchoyui Karting

    Oct 16, 2016
    81
    Hong Kong
    Full Name:
    Joe Cheung
    #1 cheungchoyui, Dec 5, 2019
    Hi Guys,

    I got a pair of Recaro Pole Position Seats ready to be mount on my 355. I bought the L plates as well. But how could it be fit on the original seat rails ?

    Does anyone here has experience on this and could give me some advice. Thanks !


    Sent from my iPhone using FerrariChat
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #2 yelcab, Dec 6, 2019
    You need to make up some custom mounting brackets
     
  3. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #3 ruey220, Dec 8, 2019
    Do you know who can make them in the bay area?
     
  4. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #4 yelcab, Dec 9, 2019
    well, I made my own.
     
  5. cheungchoyui

    cheungchoyui Karting

    Oct 16, 2016
    81
    Hong Kong
    Full Name:
    Joe Cheung
    #5 cheungchoyui, Dec 9, 2019
    Hi, do you have any pic that could share ?

    Thanks


    Sent from my iPhone using FerrariChat
     
  6. cheungchoyui

    cheungchoyui Karting

    Oct 16, 2016
    81
    Hong Kong
    Full Name:
    Joe Cheung
    #6 cheungchoyui, Dec 9, 2019
  7. User-C3

    User-C3 Karting

    Aug 29, 2018
    206
    Detroit
    Full Name:
    Trevor
    #7 User-C3, Dec 9, 2019
    those look great, I need a pair for mine.
     
  8. ruey220

    ruey220 Formula Junior
    Rossa Subscribed

    May 24, 2019
    312
    Sf bay area
    Full Name:
    RM
    #8 ruey220, Dec 9, 2019
    Can you give me an idea how you made it? I have the side brackets but the bottom doesnt line up with the sliders
     
  9. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,662
    San Carlos, CA
    Full Name:
    Mitchell Le
    #9 yelcab, Dec 9, 2019
    You need to weld up a pied of right angle stock to a piece of straight stock. Then drill holes to accommodate the rear mounting points to the chassis. Then you also need to drill holes to mount the sliders to the flat stock so the seat can be mounted to the bracket. It is recommended that you have at least the slider for the drive side so you can ingress and egress easier.
     

Share This Page