430 - Shifter cable tie rod | FerrariChat

430 Shifter cable tie rod

Discussion in '360/430' started by tpbriggs, Feb 16, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    8
    #1 tpbriggs, Feb 16, 2020
    Does anyone know if a 360 shifter cable tie rod end will fit an F430? Broke the tie rod end while installing new shifter bushing and it looks like Ferrari only sells entire cable set for F430 but does sell shifter cable tie rod for 360. Thanks for any help!




    Sent from my iPhone using FerrariChat.com mobile app
     
  2. brogenville

    brogenville Formula 3
    Rossa Subscribed

    Apr 24, 2012
    2,017
    UK
    Full Name:
    Robin
    #2 brogenville, Feb 17, 2020
    Shift towers are interchangeable between 360 and 430, so I would assume the cable end connections are too.


    Sent from my iPhone using FerrariChat.com mobile app
     
  3. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    8
    #3 tpbriggs, Feb 17, 2020
    brogenville likes this.
  4. shifter

    shifter Formula Junior
    Silver Subscribed

    Apr 8, 2004
    625
    Danville, Ca
    Full Name:
    Joe
    #4 shifter, Feb 19, 2020
    Agree, it should work.

    For others doing the same - replacing the bushing, It can be done without removing the Assy.



    Sent from my iPhone using FerrariChat
     
  5. tpbriggs

    tpbriggs Rookie

    Mar 28, 2016
    8
    #5 tpbriggs, Feb 26, 2020
    Closing the loop on this one. The 360 shifter cable tie rod end is an exact replacement on the F430. If you are changing your shifter bushing do your self a favor and do it with the shifter in place. If you search the forum for “Hill shifter bushing replacement F430” there is an informative write up by shifter.


    Sent from my iPad using FerrariChat.com mobile app
     

Share This Page