NOS clock but which model maserati model does this belong?
Wow. That looks really lovely - and is extremely hard to find. It took me 2 years and £400+ to get my non working one! Would be suitable for a Ghibli, Indy for certain. Khamsin And Bora/Merak I think have a different adjuster knob, but basically the same. Stay well everyone. Mark.
thank you mark for your very helpful reply. i added additional pix to show the original, very rare instruction hang tag. Image Unavailable, Please Login Image Unavailable, Please Login
Same on the Indy 4900. Yes there is a broken windscreen too, I just sourced a new one after a whole year of research... Image Unavailable, Please Login
Image Unavailable, Please Login Image Unavailable, Please Login ActuActually teh aaaa Similar, but not the same. If you look carefully at the Ghibli photo showing the clock you will see that the diameter is larger than the other gauges. The Indy 4700/4900, Khamsin, Bora and Merak used a smaller clock whose diameter was the same as the other gauges. Although no dimension was provided for this clock, the slot head screw in the adjustment knob would point me to think this is the larger version used on the Ghibli and perhaps early Indy. Below are photos showing the Indy 4700 and Khamsin clocks, which you can see are the same size as the other gauges. Ivan Image Unavailable, Please Login Image Unavailable, Please Login
If you plan to sell it the prudent thing to do is to measure your clock's diameter so that potential buyers are better informed and do not end up with something that will not fit their car. Ivan
If I understand correctly with the picture shown by awohlmann, this clock was mounted only on Ghibli's or only certain Ghibli's, due to a larger diameter than standard. Was there a specific larger hole in the dash?
Both of my Ghiblis had the clock with a larger diameter than the other instruments.This seems to be original, because the hole in the dash was correctly cut out - not a hand made larger one. Alfred Image Unavailable, Please Login
clock body diameter is 60 mm. so the hole in the dash should be 60mm. Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login