Issue Removing passenger seat | FerrariChat

Issue Removing passenger seat

Discussion in '308/328' started by kidryno, Apr 13, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. kidryno

    kidryno Karting

    Dec 22, 2014
    92
    Atlanta, GA
    Unable to move my passenger seat up far enough to access the mounting screws. The drivers seat came out just fine. Anyone else have this issue?


    Sent from my iPhone using FerrariChat.com mobile app
     
  2. Alex308qv

    Alex308qv Formula Junior

    Jul 1, 2016
    378
    PA
    Full Name:
    Alex
    Had same issue. Keep working it back and forth and eventually you'll be able to push if forward enough to access the rear screws. Make sure nothing is obstructing the front. Once out, of course clean and lube the tracks!
     
    kidryno likes this.
  3. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,661
    San Carlos, CA
    Full Name:
    Mitchell Le
    I had to drill out the screws from the bottom once. Was stuck shut.
     
    kidryno likes this.
  4. Baltz1969

    Baltz1969 Karting

    Apr 24, 2017
    67
    Chula Vista, CA
    Full Name:
    Jose Baltz
    Make sure that the seatbelt is not causing the obstruction. I had to remove the seatbelt on the driver side because I was not able to push it forward like you indicated. Once I removed the seatbelt it was able to move it forward


    Sent from my iPad using FerrariChat.com mobile app
     
    kidryno likes this.
  5. ulf308qv

    ulf308qv Karting

    Nov 1, 2003
    100
    Sweden
    Full Name:
    Ulf M
    I had the same issue, shut stuck. WD40 on the rails finally made the seat move further and further.
    Have had the car for 20+ years. Wanted to take the seat out from the day I got the car, but always gave up. Last Christmas I finally succeeded.
     
    kidryno likes this.
  6. kidryno

    kidryno Karting

    Dec 22, 2014
    92
    Atlanta, GA
    #6 kidryno, Apr 17, 2020
    Last edited: Apr 17, 2020

Share This Page