355 - AC expansion valve | Page 2 | FerrariChat

355 AC expansion valve

Discussion in '348/355' started by Beetle, May 28, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Beetle

    Beetle Formula Junior

    Joined:
    Apr 10, 2013
    Messages:
    776
    More to it than port size unfortunately. If you read previous threads you see there is quite a bit involved.
     
  2. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    Paul you posted it was in the interchange post, was that information wrong you found? https://www.ferrarichat.com/forum/posts/147253458/

    I can't believe is that hard to find one that works. Its a block with ports, find one with the same ports, nothing in this thread changes that information that I read, what am I missing... These are also available form Ferrari. If in doubt but the right one they are not NLA.
    https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/355-group/f355-m2-7-1995/evaporator-unit-and-passengers-compartment-aeration/65518600-expansion-valve.html
    Buy a new one, put it in don't worry for another 35 years. Beats doing it wrong and redoing to it to save a few bucks if it is actually this hard and risky to find an xref. Carry on I guess I am missing the point of the thread which is fine. Lots of options for you to venture down on this specific issue so that's good news! :)
     
    Last edited: Jun 5, 2020
  3. m.stojanovic

    m.stojanovic F1 Rookie Silver Subscribed

    Joined:
    Dec 22, 2011
    Messages:
    3,314
    Location:
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    Ferrarium and Beetle like this.
  4. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,293
    Location:
    CT
    Full Name:
    John Kreskovsky
    Qavion likes this.
  5. Beetle

    Beetle Formula Junior

    Joined:
    Apr 10, 2013
    Messages:
    776
    Regassing Sat night. I will post my findings but to be honest I don't foresee any issues with the Alfa tx valve.
     
  6. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    So it is port mostly just sizes after all, good glad its sorted. Summer is here!
     
  7. johnk...

    johnk... F1 World Champ Owner

    Joined:
    Jun 11, 2004
    Messages:
    11,293
    Location:
    CT
    Full Name:
    John Kreskovsky
    The Cool zone 22-1064 specified for the F355 is also specified for the Alfa 145, 146, 147 and 166.
     
    Beetle likes this.
  8. Ferrarium

    Ferrarium F1 Veteran Sponsor Rossa Subscribed

    Joined:
    Jul 28, 2018
    Messages:
    5,728
    Location:
    Central NJ
    Full Name:
    Eric
    Awesome info.
     
  9. Beetle

    Beetle Formula Junior

    Joined:
    Apr 10, 2013
    Messages:
    776
    Regassed system today with Alfa TX Valve. No issues works fine pressures are all perfect. The Alfa 146 TX valve is a perfect substitute at 1/2 the price of the Ferrari type. AC HVAC System works great
     
    kenneyd and Qavion like this.

Share This Page