430 - Radio/ CD removal | FerrariChat
Buy

430 Radio/ CD removal

Discussion in '360/430' started by mike32, Jun 20, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,921
    Isle of man- uk
    #1 mike32, Jun 20, 2020
    I am trying to change my oem radio /cd on my 2008 430. I have the release slot on the right hand side but nothing on the left hand side. The facia has a small section on the left hand side so i assume the volumn knob has to be removed and this section of the facia removed to access the release slot.
    Anyone know how to get to this release slot ?
     
  2. 24000rpm

    24000rpm F1 Rookie

    Aug 31, 2012
    4,651
    China and California
    #2 24000rpm, Jun 20, 2020
  3. Jgivoo

    Jgivoo Formula Junior
    Silver Subscribed

    Jan 22, 2016
    436
    New Jersey
    #3 Jgivoo, Jun 20, 2020
    Go to 3:00 minutes into video. As 24000rpm posted, slide Ferrari logo to right. Left knob panel can be removed

     
    van22 likes this.
  4. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,921
    Isle of man- uk
    #4 mike32, Jun 20, 2020
  5. Extreme1

    Extreme1 Formula 3

    Jun 27, 2017
    1,386
    Santa Clarita, CA
    #5 Extreme1, Jun 20, 2020
    I just went thru this. You will need to push the tools in fairly hard to get the radio to release. It will pop out slightly, then you can pull it out.
    My tools were stuck in the radio and I had to us a small screwdriver to release the latch, then I was able to reinstall the radio.
    PM me if you need to.


    Sent from my iPad using FerrariChat.com mobile app
     
  6. 24000rpm

    24000rpm F1 Rookie

    Aug 31, 2012
    4,651
    China and California
    #6 24000rpm, Jun 20, 2020
    push from behind is easier. And will not damage the plastic in the front


    f
     
  7. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,921
    Isle of man- uk
    #7 mike32, Jun 20, 2020
    Once we had the tools in, it came out easy. The Alpine unit we fitted as replacement was an easy fit, only needed an aerial adaptor and no need to cut or modify any wires. Plug and play .
     
  8. bamaman

    bamaman Formula Junior

    Nov 27, 2015
    912
    Mobile Alabama
    Full Name:
    William M (B.J.) Lyon, Jr.
    #8 bamaman, Jun 20, 2020
    Which Alpine model did you install? I plan on replacing my Becker too. Thanks.
     
  9. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,921
    Isle of man- uk
    #9 mike32, Jun 21, 2020
    Alpine CDE-203BT
     

Share This Page