So I found a 360 carbonfiber rear hatch now what? | Page 2 | FerrariChat

So I found a 360 carbonfiber rear hatch now what?

Discussion in '360/430' started by 02360spider, Jun 26, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Pm sent also what adhesive do I use never messed with lexan.

    Sent from my SM-N975U using Tapatalk
     
  2. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
  3. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
  4. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    If anyone knows its you

    Sent from my SM-N975U using Tapatalk
     
  5. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    I don't think thats a OEM challenge trunk. I think that someone maybe made a reproduction of it in full carbon. This looks a reproduction of the CS style ducktail lip which is a nice add on. I bought a factory Challenge rear lid on eBay last month off a challenge car, and it was not carbon. In fact it looked like a factory Modena trunk with added carbon cross brace which is to hold up the lexan on high speeds and the lexan. The whole thing was metal, and the only carbon was the cross brace bars and the rear scoop attachment. Anyways, I bought it because it was the perfect project trunk to add Rizzo's CS style lip to it. Plus the carbon brace bars alone are $1000 each piece, so with the trunk and lexan it was a good deal. The rear view mirror view of the brace bars are super cool. And its seems it weights 40% less than the stock. Finding oem CS rear trunk is near impossible to find so this is good.

    Randy is right the factory louvers are about $1500 a piece and you need the CS bracket (#10) to fit them. Your other option would be to use the OEM ones or get the aftermarket Louvers from eBay for $900 for the pair.

    https://www.ebay.com/itm/FERRARI-360-Challenge-Plexi-Lightweight-Engine-Cover-W-Carbon-Fiber-Air-Scoop/223928415377?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

    Heres some before and after picture.
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
  6. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    Also the scoop totally cools down the rear lid.....holy crap its cool to the touch where before you couldn't touch it or you'd get burnt.
     
    one4torque likes this.
  7. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    I just do see how someone would make this aftermarket the cost would be crazy for a one off. The 360 carbon hatch is so light and I have never seen one before so who made it? I seen that challenge hatch you bought on ebay good buy i almost bought it honestly.

    Sent from my SM-N975U using Tapatalk
     
  8. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    I have aftermarket carbon louvers on mine so I would just transfer those.i still need to order the carbon cross braces and lexan

    Sent from my SM-N975U using Tapatalk
     
  9. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,625
    England
    Full Name:
    Mark
    The Challenge parts were aluminium. Ferrari did commission some one off parts as prototypes for the 360 and the Scuderia, but these are mostly branded with CBS or Sparco labels.

    Looking at the finish of the underside I'll wager it's aftermarket, but as you said someone went to a hell of a lot of effort. Nice part.
     
    02360spider likes this.
  10. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    The clear coat on the carbon looks ruff im going to have it polished up and cleaned.i am going to attempt to remover the grey on the deck lid to reveal the carbon

    Sent from my SM-N975U using Tapatalk
     
    veilstylez likes this.
  11. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,625
    England
    Full Name:
    Mark
    It will come up perfectly after a sand and re-lacquer/clear. I'll look forward to seeing the results.
     
    02360spider likes this.
  12. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    oooh exposed carbon would be awesome.
     
    02360spider likes this.
  13. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Nice did the vendor have more
     
  14. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    No pretty sure this is a one of a kind and no one has ever seen a complete carbonfiber hatch

    Sent from my SM-N975U using Tapatalk
     
  15. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    With lexan and the carbon fiber cross brace I think it will look pretty awsome.

    Sent from my SM-N975U using Tapatalk
     
  16. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    Yeah, I think so too. the carbon brace is so awesome to see through the back window.

    can't wait to see how you finish it.
     
    one4torque and 02360spider like this.
  17. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,090
    Houston
    Full Name:
    One4torque
    Cool project. Please note wgt savings if you have access to scales to compare.

    guessing 50lbs?
     
  18. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    You can save 25 30 pounds just switching too lexan over glass
     
  19. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Hopefully it fits biggest problem will be the latch im sure or lack of a latch i would hate to put the challenge hood pins.

    Sent from my SM-N975U using Tapatalk
     
  20. jg360

    jg360 Formula Junior
    Silver Subscribed

    Feb 8, 2018
    319
    New Jersey
    Full Name:
    John Gurrieri
    02360spider, where did you source the two braces and are they carbon?
     
  21. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Wow forgot I even had this post lol.i got them from someone online we swapped parts.

    Sent from my SM-S908U1 using Tapatalk
     
  22. Rattimaser

    Rattimaser Rookie

    Aug 4, 2022
    29
    Full Name:
    Stuart birch
    Hi
    Don't suppose you've found anyone who is making these?
     
  23. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Definitely not 1 of 1 but she hasn't held up well to high rpm and taking a beating she is starting to get waves in the carbon

    Sent from my SM-S918U using Tapatalk
     
    clean512 likes this.
  24. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    That is not good
     
  25. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Definitely not! it's crazy the amount of heat these cars put out.I tried some reflective heat tape but I will be removing it and doing the cs heat shield

    Sent from my SM-S918U using Tapatalk
     

    Attached Files:

    RANDY6005 and clean512 like this.

Share This Page