Question for anyone who is using the Odyssey 34R-PC1500T | FerrariChat

Question for anyone who is using the Odyssey 34R-PC1500T

Discussion in '360/430' started by CoreyNJ, Jul 9, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. CoreyNJ

    CoreyNJ Formula 3
    Silver Subscribed

    Apr 17, 2006
    2,023
    New Jersey Shore
    #1 CoreyNJ, Jul 9, 2020
    Hi,

    Just doing some google research. Does the Odyssey 34R-PC1500T battery actually fit with out any modifications in a 430? Does it work ok with the later model OEM battery charger on 2008/2009 models?

    Don't think I need a battery just yet, but just getting prepared as I'm sure I will need one soon.

    Thanks,
    Cheers,
    Corey
     
  2. RedNeck

    RedNeck F1 Veteran
    Silver Subscribed

    Jul 8, 2016
    9,979
    The CSA
    Full Name:
    Me
    #2 RedNeck, Jul 11, 2020
    The 1500 is a super tight fit, I have it. I believe Odyssey changed their recommended size for the 360/430 to the 48 group. If the OEM is a Ctek with AGM or "snowflake" option,it should be fine.
     
  3. Need4Spd

    Need4Spd F1 Veteran

    Feb 24, 2007
    6,645
    Silicon Valley
    #3 Need4Spd, Jul 11, 2020
    360 takes a T6/L2. 430 takes an H6. While similar in size, the H6 is taller. I don’t know what that translates to in an Odyssey.


    Sent from my iPad using FerrariChat
     
  4. rudkinjc

    rudkinjc Rookie

    Apr 27, 2019
    45
    Jacksonville Fl
    Full Name:
    Joe C Rudkin II
    #4 rudkinjc, Jul 13, 2020
    I put one in my 360. My long tie down screws were just a few mm to short. Easy fix I just bought some long ones (generic) at the auto part store cut them to the correct length with a dremel. Saved the original
     

Share This Page