Fuel dripping from Daytona Carb Banjo bolts | Page 2 | FerrariChat

Fuel dripping from Daytona Carb Banjo bolts

Discussion in 'Vintage (thru 365 GTC4)' started by bighitter2, Jul 5, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. christc

    christc Formula Junior

    Mar 3, 2013
    444
    Germany
    Hi John,

    understood. Thanks a lot for making it clear for me.

    Christopher
     
  2. JimEakin

    JimEakin Formula Junior

    Jun 13, 2015
    988
    Mountain Living
    Full Name:
    Jim
    So the fuel rail should be bolted on to the carbs before the carb mounting bolts are tightened.
     
  3. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,145
    Riverside, CA
    Full Name:
    Timo
    Quite difficult with tightly grouped DCNs on Daytonas and not (usually) necessary, but can be done ...
     
  4. bighitter2

    bighitter2 Formula Junior

    May 7, 2005
    486
    virginia usa
    Full Name:
    chuck coli
    Copper washers no where near as soft as the aluminum washers, bought a bag of 50 on amazon for next time..thanks for everyone’s help....the easiest thing i have done on a Daytona besides changing the oil and filters :)
     

Share This Page