Wanted - Wanted: Novitec spacers | FerrariChat

Wanted Wanted: Novitec spacers

Discussion in 'Ferrari Parts & Collectibles' started by Citadel, Jul 26, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Citadel

    Citadel Karting

    Aug 6, 2017
    153
    Dallas, Texas
    Anyone have a set of Novitec spacers for sale?
     
  2. kimwizzzuuu

    kimwizzzuuu Karting

    Aug 26, 2018
    240
    new york
    Full Name:
    Kim
    What spec you looking for? I have a set of 20mm Novitec spacers for sell.
     
  3. Citadel

    Citadel Karting

    Aug 6, 2017
    153
    Dallas, Texas
    20mm would work. I need 15mm for the front and 20mm for the rear.
    Which style spacers are these?
     
  4. kimwizzzuuu

    kimwizzzuuu Karting

    Aug 26, 2018
    240
    new york
    Full Name:
    Kim
    What do u mean by which style?
     
  5. Citadel

    Citadel Karting

    Aug 6, 2017
    153
    Dallas, Texas
    Does the wheel bolt connect through the spacer directly to the rotors (screwing into the rotor) or does the wheel bolt screw into the spacer and not screw into the rotor?
    If you can send a picture of the spacer, that will give me the answer
     
  6. kimwizzzuuu

    kimwizzzuuu Karting

    Aug 26, 2018
    240
    new york
    Full Name:
    Kim
    20mm Novitec spacers, stock bolts are screw on to the spacers. Or you could order longer titanium bolts from Novitec to fit 20mm spacers to bolt them on to the rotor.
     
  7. Citadel

    Citadel Karting

    Aug 6, 2017
    153
    Dallas, Texas
    So all Novitec 20mm spacers are made so the stock bolts screw into the spacers?
    Not into the rotor?
     
  8. kimwizzzuuu

    kimwizzzuuu Karting

    Aug 26, 2018
    240
    new york
    Full Name:
    Kim
    I believe so, my 15mm set up uses extended bolts to direct bolt onto the rotor.
     
  9. Citadel

    Citadel Karting

    Aug 6, 2017
    153
    Dallas, Texas
    How much for your spacers? Feel free to send a PM
     

Share This Page