Looking for this part for 330GTC | FerrariChat

Looking for this part for 330GTC

Discussion in 'Vintage (thru 365 GTC4)' started by Oengus, Aug 1, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Sep 29, 2004
    10,044
    Between timing belts/chains or West Palm Beach FL
    Full Name:
    Chas
    #1 Oengus, Aug 1, 2020
  2. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,537
    Gilbert, AZ
    Full Name:
    Ed
    #2 enio45, Aug 1, 2020
    unless u find one - hard to do....i would make one out of aluminum.....assume u have the other one from the other side?
     
    turbo-joe likes this.
  3. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Sep 29, 2004
    10,044
    Between timing belts/chains or West Palm Beach FL
    Full Name:
    Chas
    #3 Oengus, Aug 1, 2020
    yes I do have the other side
     
  4. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,537
    Gilbert, AZ
    Full Name:
    Ed
    #4 enio45, Aug 1, 2020
    with a small flat blade screw driver it will pop out - it is made of plastic and chromed. Have one made from alum and u can
    have it either polished or chromed and your all set.
     
    TTR likes this.
  5. TTR

    TTR F1 Veteran
    Rossa Subscribed

    Mar 29, 2007
    5,191
    Riverside, CA
    Full Name:
    Timo
    #5 TTR, Aug 1, 2020
    ... or stainless and polished.
    Also, if fabricating, might be a good idea to make two (or more) and place them on both sides to give matching appearance.
     
    enio45 likes this.
  6. enio45

    enio45 Formula 3
    Rossa Subscribed

    May 16, 2004
    1,537
    Gilbert, AZ
    Full Name:
    Ed
    #6 enio45, Aug 1, 2020
    yes , good point!
     
  7. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Sep 29, 2004
    10,044
    Between timing belts/chains or West Palm Beach FL
    Full Name:
    Chas
    #7 Oengus, Aug 1, 2020
    ok I’m on it....ty
     

Share This Page