458 Anyone know where to source this door part?

I've had good luck locating needed parts at Ricambi America. https://www.ricambiamerica.com/car-diagrams/ferrari/v6-v8/360-group/360-spider.html

 

Is yours a 458 or 488 ?

The only reason I ask is that that triangle wasn't sitting properly on my 488 GTB.

They reordered a new one for me as it was broken inside the triangle and the new one had the Xmas Tree.

 

I have tons of those pins. PM me your address and I'll send you a couple, on me.
The black plastic triangle is the same for the 458, 458 Spider, 488, 488 Spider, F8, F8 Spider, Pista, Pista Spider and I think the SF 90 (but not sure on that one).
If you take the part off a couple of times, the pin wears out and the part won't sit tight against the door. It just needs a new pin (unless the inner plate cracks).


Image Unavailable, Please Login

 

The parts will be on your doorstep before tomorrow noon.

 

Part #? I need one or two...

 

https://www.amazon.com/Fastener-100Pcs-Universal-Bumper-Retainer/dp/B07S7TDV42/ref=asc_df_B07S7TDV42/?tag=hyprod-20&linkCode=df0&hvadid=576326311660&hvpos=&hvnetw=g&hvrand=15631503530984036025&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027263&hvtargid=pla-1599507837026&psc=1

 

Thanks Brian!

 

Sorry sorry, just saw this. Let me know if you still need a couple and I will overnight them to you.
BTW, the SF90 black plastic triangle is much different. I now manufacture 3D printed tweeter pods for the SF90 and the 296.

 

Brian, I overnighted you a couple of push pins. Happy to help.

 

Awesome, Mr. Drone

 

Is there any chance someone has the dimensions for these fasteners, or can measure one for me please? They seem to be easy enough to buy from generic suppliers, but I need to know the pin width and length as well as the head width.