430 - Engine/ gearbox mounts upgrade | FerrariChat

430 Engine/ gearbox mounts upgrade

Discussion in '360/430' started by slracing, Aug 7, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. slracing

    slracing Formula Junior
    Rossa Subscribed

    Jan 13, 2011
    427
    Europe
    Have any of you upgraded your standard mounts to Scud/ Challenge spec when the org went bad?
     
  2. zboost300

    zboost300 Karting

    Jan 27, 2019
    139
    I am replacing mine soon as they are shot, but from experience in previous cars.... Usually you will get more NVH with "upgraded" or "sport/race" mounts
     
    tfos750 likes this.
  3. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,641
    England
    Full Name:
    Mark
    The Scuderia gearbox mount is fine and a good upgrade, but the Challenge/CS engine mounts add a noticeable amount of NVH for not a huge amount of gain.
     
    duck.co.za likes this.
  4. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,835
    Isle of man- uk
    I believe the gearbox mount is a challenge to change, you need a special extractor like the one from hill engineering
     
  5. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    2,754
    WI
    Full Name:
    Dustin
    It is horrible to change. It took me a couple days. Mine was corroded in. I ended up making a couple cuts into the outer ring of the mount and then it came out rather easy. To get it in, I recommend freezing it overnight so it becomes slightly smaller.
     
  6. RedNeck

    RedNeck F1 Veteran
    Silver Subscribed

    Jul 8, 2016
    9,972
    The CSA
    Full Name:
    Me
    I have the tool and it was still quite the challenge..
     
  7. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,730
    Dartmouth
    Full Name:
    Richard oliveira
    Same mine was a nightmare to remove.

    Sent from my SM-N975U using Tapatalk
     

Share This Page