360 - CS TI Springs | FerrariChat

360 CS TI Springs

Discussion in '360/430' started by RANDY6005, Aug 13, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    I have bought all four CS Ti springs reading, Reading threw the CS work shop manual there are three different colors red, white, clear, means they are different sizes. Looking at the parts numbers for the rear springs they are same numbers so wend you order them you do not what color they are ? So I have one white rear and one red rear Ti springs do they have to all match ?? Any help would be fantastic !
     
  2. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  3. tazandjan

    tazandjan Three Time F1 World Champ
    Lifetime Rossa Owner

    Jul 19, 2008
    37,986
    Clarksville, Tennessee
    Full Name:
    Terry H Phillips
    The springs are tested and grouped by stiffness to be sold in pairs. You really would like both the same color/stiffness, but it probably takes a pretty educated rear end to feel the difference.
     
    one4torque and RANDY6005 like this.
  4. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    I was thinking to same way that maybe I could never tell any difference. But damn it man I have been making everything so perfect do not want start short cuts now almost done from bumper to bumper. I think I have three matching in red so just swoop out the white one to red, I emailed Neil at Eurospares see if has a red one .
     
  5. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,625
    England
    Full Name:
    Mark
    Yes, they should be matched at each end. When ordering you must ask for the colour.
     
  6. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Maybe the seller should ask ? the average Joe Who think too ask ??
     
  7. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,625
    England
    Full Name:
    Mark
    Yes I agree and I really don't know why each colour doesn't have a different part number, it doesn't make sense to me.
     
    RANDY6005 likes this.
  8. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Well Damn it !! I have to unbolt everything and redo again, not a big deal I am replacing every thing in Ti bolts and washers and nuts .
     
    mwstewart likes this.
  9. 02360spider

    02360spider Formula 3
    Silver Subscribed

    May 27, 2015
    1,724
    Dartmouth
    Full Name:
    Richard oliveira
    Randy what did the springs run you?

    Sent from my SM-N975U using Tapatalk
     
  10. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Front new per shock 800.00 rears per shock 1143.00
     
  11. rizzo308

    rizzo308 F1 Rookie
    Silver Subscribed

    Sep 12, 2004
    2,687
    Perth, Australia
    Full Name:
    riggio
    Hi Randy
    Which way did you go with flamblock bushes delrin, poly.
    Cheers
     
  12. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Yes and I have a set that has needle bearings .
     
  13. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  14. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Ti fasteners just for left hand rear , I will way all the stock fasteners and all the new Ti and post next few days .
     
  15. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    I look threw my spare parts I have delrin and the needle what is better of the two ?
     
  16. rizzo308

    rizzo308 F1 Rookie
    Silver Subscribed

    Sep 12, 2004
    2,687
    Perth, Australia
    Full Name:
    riggio
    I have a few new delrin bushes but there's wee bit on the loose side so I wont be using them. I maybe looking at having poly bushes made up. Delrin me thinks is gonna be bit to harsh for street use.
    Cheers
     
  17. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Everything about your car randy is a absolutely a goal to mine.
     
    RANDY6005 likes this.
  18. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  19. 24000rpm

    24000rpm F1 Rookie

    wow, why is it all bunched up at the top?
     
  20. mwstewart

    mwstewart F1 Rookie

    Feb 5, 2014
    2,625
    England
    Full Name:
    Mark
    The Scud and CS springs are progressive
     
  21. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Measured friends CS shocks rears are 1 1/2 inches from treads to bottom of the spring and the fronts 2 1/4 that should get me close on the correct ride height .
     
  22. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Red mark Ti springs weight less than white mark Ti springs wonder why ?
     

Share This Page