Torque Specs for Cam Covers and Cam Collars | FerrariChat

Torque Specs for Cam Covers and Cam Collars

Discussion in '308/328' started by fiatbrett, Oct 19, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fiatbrett

    fiatbrett Karting

    Aug 20, 2009
    98
    Tallahassee, Florida
    Full Name:
    Brett B
    I’m replacing cam seals on an 1985 308 QV and wanted to double check the torque specs for the cam cover bolts and the collars that hold the cams down.

    The manual says 9 NM for the cam cover bolts and I’ve read here 76 inch pounds/8.5 NM for the bracket bolts that hold down the cams. Are these correct?

    Thanks!
     
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    12,661
    San Carlos, CA
    Full Name:
    Mitchell Le
    9-10 Nm is right.
     
    waymar likes this.

Share This Page