Best option if 612 standard skyhook shocks are blown?

Jason- Those shocks are very, very tough, so I doubt there is anything wrong with them. On the 575M, we have only seen one or two examples of the Sachs shocks leaking, and they do not have the Bilstein propensity to wear out. Unfortunately nobody is rebuilding them that we have found. Check geometry, especially ride height, since if too low, that makes the shocks feel like they are not working properly. Engine and transaxle mounts being worn can give similar sensations.

 

Jason- Not unless she has seen very hard service. The hyperblocks seem to hold up pretty well from what I have read. I really doubt your shocks are the problem, but would be interested in knowing who the rebuilder is. Rod at Delta Vee was not doing them last time I checked.

 

Thread revival...

I just picked up a 28k mile 2008 612 and have a noisy and rough ride over small bumps/cracks in the road. I feel like I may be in need of replacing some of the wearable suspension parts rather than the shocks.

Does anyone have an idea of how big a job that is in terms of man hours and parts cost?

Thanks in advance

 

https://www.ferrarichat.com/forum/threads/replacement-cost-of-front-upper-and-lower-ball-joint-rubber-seals.626231/

 

Thank you. Somehow I missed that in my search.

 

It looks pretty straightforward. I am just researching exactly this and came across the following video referenced from the Ricambi site. Looks like Hill Engineering supplies kits with parts, tools, glue and everything.



Although this is 430 I believe 612 is exactly the same.

Sent from my iPad using FerrariChat.com mobile app

 

Thanks for video.

 

yes, for the upper and lower ball joints indeed they are the same pieces: Ball Joint Bundle @ Ricambi America

 

All,

Thanks for your feedback a couple months ago on my 612 suspension. I just had the upper and lower ball joints replaced with Hill parts and I still have issues, primarily over low speed bumps where the ride is rough and the suspension is loud.

I'm exploring if shock mounts are the culprit but does anyone have updated feedback on whether shocks are being rebuilt anywhere?

 

There’s a place in the Netherlands rebuilding them. I spoke to them about it last summer, but the cost was pretty high. They apparently had to develop some of their own tooling and methods to take the shocks apart. I think the issue is that there isn’t an external charge port, but some specialists can add one.


Sent from my iPhone using FerrariChat

 

Has anyone here tried replacing your dampers and rear ARB with HGTS/C parts? How was the ride?