458 - Has anyone installed H&R springs on their 458? | FerrariChat

458 Has anyone installed H&R springs on their 458?

Discussion in '458 Italia/488/F8' started by Tarek307, Nov 3, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Tarek307

    Tarek307 Formula 3
    Silver Subscribed

    Sep 26, 2018
    1,294
    Long Beach, CA & Alexandria,Egypt.
    Full Name:
    Tarek Salah
    Anyone here use H&R springs to lower their 458? YES I KNOW ABOUT NOVITECH but H&R also make springs for the 458 and want to know if anyone has experience with using them. I've used H&R for years on my Porsches with great results...and there is quite a price difference between H&R and novitech

    Wheel gap sucks on my car..and i have front lifter so can't move too much on the stock springs.

    PS: I did use the search function and there was 1 thread regarding the H&R but the entire discussion shifted towards Novitech
     
  2. v35

    v35 Karting

    May 15, 2013
    190
    Los Angeles
    Full Name:
    Aaron
    There is a nicely priced set of Novitec in the classifieds section if cost is an issue.
     
  3. obbob

    obbob Formula Junior

    Aug 14, 2017
    774
    Novitec springs are just rebranded K&W springs specifically cut for Ferrari models.

    H&R springs are perfectly fine quality wise. You just may have to deal with some more manual height adjustment if the springs aren't specifically designed for the 458.
     
  4. Tarek307

    Tarek307 Formula 3
    Silver Subscribed

    Sep 26, 2018
    1,294
    Long Beach, CA & Alexandria,Egypt.
    Full Name:
    Tarek Salah

Share This Page