Main bearing and con rod tightening torques?

Main - 8.25kg ~59 ft lb
Rod - 5.51kg~ 40 ft lb

 

Are you talking about a 365 GT4 2+2 because if not they are completely different engines. I’d recommend you get a shop manual instead of asking these questions on the internet. Now if you are just verifying info you already have that’s fine.

 

Just in case
Erwin's google drive access : https://www.ferrarichat.com/forum/threads/wire-diagram.564951/#post-145737999
Ferrari 400 register manuals : http://www.400register.com/manuals/365-manuals.asp

Anyone got a scan of the specific 365 WSM?

 

Just trying to help. You say you have a 365 GT 2+2. This section here at Ferrari Chat is about the Ferrari 365 GT4 2+2.
If your engine has single overhead camshafts and three down draft Weber carbs then the best area to ask about your car is in the Vintage section of Ferrari Chat.
If your engine has double overhead cams and 6 Weber sidedraft carbs then this is the correct section.
So do you have 3 Weber downdraft carbs or Six Weber Sidedraft carbs?
Once we can establish what you have someone can probably help you find a manual.

 

This one is for GTC4 (i.e like 400 not like the daytona).

 

Hello Mathew, Maranello Literature shows a Torque Table for the 365 GT 2+2 on its site, perhaps it contains what you are looking for:

http://www.maranello-literature.com/maranello-literature/product_info.php?products_id=3519&osCsid=4b4251e462035f42a0c4774cb8320a53