Image Unavailable, Please Login Image Unavailable, Please Login All, I am talking to a fab shop about producing the CS engine compartment end panels that fill the void on each side muffler at the rear. You all know what I'm talking about it's just they are described as "panels" in the book. 67734700 (LH/Not US, CDN, JP) 67948200 (LH for US, CDN, JP) 67734600 (RH w/F1 tank cutout) modified RH without F1 cutout The difference between the two LH panels is on the US CS cars, there is an emission tube running over there. If you do not have the tube, the Non-US panel fits without issue since this is what I have on my car. I don't know pricing yet or even if the can do it so I am just trying to find out how many of you would be interested in these. Coloration has not been decided yet. Either OEM style gray wrinkle, bare, or possibly anodized or Cerakoted.
This would be awesome, Wally! I have the left side with the cutout for the emissions tube but haven't been able to secure the right side. However, if one was to make a right side, the finish probably wouldn't match the original left so I cast a vote for one of each in your version and I'll sell the original left one if a set can be made. Thank you for spear heading this!
Please consider to do have an option on the finish as some may want to paint all panels to get a match, or having them made in stainless, then they can be left unpainted. There will be lots of combinations. Thanks for bothering to do this.
I have a set they are metal they are pretty heavy . Having a set made in aluminums and wrinkle paint silver. Image Unavailable, Please Login
Randy is right they are heavy for what they are. I have a new set waiting to be installed on my car. Randy how do they bolt on to the car?
Funny just ordered left and right brackets both had small spot of rust ... Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Pulling all brackets and replacing stocks bolts with Ty hex heads bolts 48 item(s) Product Qty Total Price Remove Titanium 12MM Flat Washer 25mmOD $15.12 Titanium Hex Flange Head M12 - 1.25 X 40MM $69.74 Titanium Hex Flange Head M6 - 1.00 X 12mm $30.78 Titanium Hex Flange Head M8 - 1.25 X 20mm $28.44 Titanium Large Diameter Button Head M6 - 1.00 X 20MM $72.72 Titanium Large Flange Hex Head M6 - 1.00 X 20MM $40.56 Titanium M6 Flat washer 25mm OD $45.36 Titanium Nylock Hex Flange Nut M12 - 1.75 Tall $20.46 * If you have changed the quantity of any of your items, please make sure to update the cart before checking out. Total: $323.18
Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
Are you asking if I can get them in carbon or are you telling me you can get them in carbon? If you are asking if I can do it, it's possible, and I'll explore that when as well. Initially, I am looking at aluminum. The company I inquired with ghosted me so back to the ol' saying...if you want something done right.... If you can get them in carbon, what's your cost?