360 - Gauging interest in CS engine compartment end panels | FerrariChat

360 Gauging interest in CS engine compartment end panels

Discussion in '360/430' started by Ghostdiver, Nov 24, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

?

Do you want CS engine bay end panels? (6734700,67948200, 67734600)

  1. Right side w/F1 cutout

    8 vote(s)
    53.3%
  2. Right side w/o cutout

    6 vote(s)
    40.0%
  3. Left side w/emissions tube

    5 vote(s)
    33.3%
  4. Left side w/o tube

    7 vote(s)
    46.7%
  5. If it's not OEM I don't want it

    0 vote(s)
    0.0%
  6. THOU SHALL NOT MODIFY

    1 vote(s)
    6.7%
Multiple votes are allowed.
  1. Ghostdiver

    Ghostdiver Formula 3
    Silver Subscribed

    Mar 18, 2005
    1,326
    Southeast Texas
    Full Name:
    Wally Hollar
    Image Unavailable, Please Login Image Unavailable, Please Login All,
    I am talking to a fab shop about producing the CS engine compartment end panels that fill the void on each side muffler at the rear. You all know what I'm talking about it's just they are described as "panels" in the book.

    67734700 (LH/Not US, CDN, JP)
    67948200 (LH for US, CDN, JP)
    67734600 (RH w/F1 tank cutout)
    modified RH without F1 cutout

    The difference between the two LH panels is on the US CS cars, there is an emission tube running over there. If you do not have the tube, the Non-US panel fits without issue since this is what I have on my car.

    I don't know pricing yet or even if the can do it so I am just trying to find out how many of you would be interested in these. Coloration has not been decided yet. Either OEM style gray wrinkle, bare, or possibly anodized or Cerakoted.
     
  2. timwu12

    timwu12 Formula Junior
    Silver Subscribed

    Oct 31, 2014
    919
    TX
    This would be awesome, Wally!

    I have the left side with the cutout for the emissions tube but haven't been able to secure the right side.

    However, if one was to make a right side, the finish probably wouldn't match the original left so I cast a vote for one of each in your version and I'll sell the original left one if a set can be made.

    Thank you for spear heading this!
     
  3. MCASEY

    MCASEY Rookie

    Apr 1, 2015
    42
    Sydney Australia
    Please consider to do have an option on the finish as some may want to paint all panels to get a match, or having them made in stainless, then they can be left unpainted. There will be lots of combinations. Thanks for bothering to do this.
     
  4. one4torque

    one4torque F1 Veteran
    Silver Subscribed

    May 20, 2018
    5,090
    Houston
    Full Name:
    One4torque
    I’d take mine in plain al or steel and finish myself.
     
    RANDY6005 likes this.
  5. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
  6. sierra055

    sierra055 Formula Junior
    Silver Subscribed

    Sep 25, 2016
    353
    Melbourne, AU
    Full Name:
    Marshall
    Interested. That area just looks so unfinished
     
  7. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    #7 becausephilchow, Nov 25, 2020
    Last edited: Nov 25, 2020
    Can get them in Carbon too
     
    duskybird likes this.
  8. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Performify likes this.
  9. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    Randy is right they are heavy for what they are. I have a new set waiting to be installed on my car.

    Randy how do they bolt on to the car?
     
  10. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    You are going to have to buy a nut insert tool and the fasteners 5mm and a drill and tap set 5mm .
     
    veilstylez likes this.
  11. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  12. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  13. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    RANDY6005 likes this.
  14. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
  15. RANDY6005

    RANDY6005 Formula 3
    Silver Subscribed

    Jan 9, 2017
    2,267
    Jacksonville
    Full Name:
    RANDY
    Pulling all brackets and replacing stocks bolts with Ty hex heads bolts

    48 item(s)
    Product Qty Total Price Remove
    Titanium 12MM Flat Washer 25mmOD $15.12
    Titanium Hex Flange Head M12 - 1.25 X 40MM $69.74
    Titanium Hex Flange Head M6 - 1.00 X 12mm $30.78
    Titanium Hex Flange Head M8 - 1.25 X 20mm $28.44
    Titanium Large Diameter Button Head M6 - 1.00 X 20MM $72.72
    Titanium Large Flange Hex Head M6 - 1.00 X 20MM $40.56
    Titanium M6 Flat washer 25mm OD $45.36
    Titanium Nylock Hex Flange Nut M12 - 1.75 Tall $20.46

    [​IMG]* If you have changed the quantity of any of your items,
    please make sure to update the cart before checking out.
    Total: $323.18
     
    Performify likes this.
  16. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    oh I see. thank you
     
    RANDY6005 likes this.
  17. Ghostdiver

    Ghostdiver Formula 3
    Silver Subscribed

    Mar 18, 2005
    1,326
    Southeast Texas
    Full Name:
    Wally Hollar
    Are you asking if I can get them in carbon or are you telling me you can get them in carbon?

    If you are asking if I can do it, it's possible, and I'll explore that when as well. Initially, I am looking at aluminum. The company I inquired with ghosted me so back to the ol' saying...if you want something done right....

    If you can get them in carbon, what's your cost?
     
  18. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    PMed!
     
  19. clean512

    clean512 Formula 3
    Silver Subscribed

    Feb 4, 2010
    2,017
    Full Name:
    Josh @jtcarprojects
    Would love to see a pic
     
  20. imahorse

    imahorse F1 Rookie
    Silver Subscribed

    Nov 25, 2017
    2,648
    WI
    Full Name:
    Dustin
    I'm interested as well
     
  21. becausephilchow

    becausephilchow Formula Junior

    Aug 26, 2016
    543
    Hong Kong
    ShineKen, Performify and s1owcoach like this.
  22. veilstylez

    veilstylez Formula Junior
    Rossa Subscribed

    Jun 12, 2005
    756
    SoCal
    They look great!
    how much?
     
  23. Majin_JT

    Majin_JT Formula Junior

    Mar 15, 2008
    379
    UK
    Full Name:
    JT
    Do we have any updates ? are we any closer to these be replicated? i am after the rh side 67734600
     
  24. Majin_JT

    Majin_JT Formula Junior

    Mar 15, 2008
    379
    UK
    Full Name:
    JT
    Have you had any more progress with these panels
     

Share This Page