Help for 458 Dash parts removal | FerrariChat

Help for 458 Dash parts removal

Discussion in '458 Italia/488/F8' started by Raj Chawla, May 26, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Raj Chawla

    Raj Chawla Rookie

    May 20, 2018
    2
    Full Name:
    Rajnish Chawla
    Hi guys, been reading a lot on the forum. I'm new to Ferrari and loving every minute of the 458 I picked up.
    She's a 2010 with 9k miles but has the notorious sticky buttons. I wanted to remove these all and send them out for refinishing but could not seem to find any videos or DIY instructions on getting these parts off the car. I did search the forum but didn't come up with much. Any help with this would be appreciated.

    Image Unavailable, Please Login
     
    Andy458 and TheDiffuser like this.
  2. TheGaucho

    TheGaucho Karting

    Oct 21, 2020
    54
    Full Name:
    SergeFurRE
    Hello Raj, I have exactly the same issue. I see you started this thread in 2018 and have no responses. Were you able to find any videos or instructions on how to remove buttons from dash for refinishing?
     
  3. Kalebak

    Kalebak Rookie

    Sep 12, 2020
    14
    Boston
    Full Name:
    John
  4. Kalebak

    Kalebak Rookie

    Sep 12, 2020
    14
    Boston
    Full Name:
    John
  5. toomanymodz

    toomanymodz Rookie

    Aug 18, 2007
    33
    FL
    Full Name:
    Matt
    I've seen videos where the end result is shiny plastic buttons that look cheap. The tactile touch and sheen are gone. Not wanting this, I had my local dealer fix some of my sticky buttons. They renewed the 3 buttons in the center console for a modest $260. They look and feel like factory new again. Not sure if all dealers know how to do it right though. Good luck.
     
  6. RayJohns

    RayJohns F1 Veteran
    Silver Subscribed

    May 21, 2006
    7,881
    West Coast
    Full Name:
    Ray
    Dave at Sticky RX is who you want to use for refinishing your buttons.

    PM me if you would like the factory service manual. It shows how to remove a lot of the dash parts and might be of help to you.

    Ray
     

Share This Page