355 "STOP" button LED replacement | FerrariChat

355 "STOP" button LED replacement

Discussion in '348/355' started by Carmellini, Jan 6, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Carmellini

    Carmellini Formula Junior

    Jul 16, 2019
    814
    #1 Carmellini, Jan 6, 2021
    My STOP button LED needs replacement; What is the bulb spec? Does the button cover pop off to expose the bulb? Or do I have to disassemble the AC panel?
     
  2. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,666
    CT
    Full Name:
    John Kreskovsky
    #2 johnk..., Jan 6, 2021
    It's not an LED.

    You will need a 7219 bulb but best to replace both the STOP and RECIR bulbs so they are the same brightness.
    https://www.jacksonelectricsupply.com/7219-Miniature-Bulb-Wire-Terminal-Base-p/7219.htm?gclid=Cj0KCQiA3NX_BRDQARIsALA3fIKf4eVdPFKbQbg-53WD-fL25TzoRNfjaQ8bPLPiEqZMfFQDPeKPtEgaApamEALw_wcB

    And you may need a couple of green "socks".

    https://www.ebay.com/itm/XPT01G-100pcs-GREEN-Caps-Covers-for-3mm-Grain-of-Wheat-Bulbs-LEDs-NEW/221101885073?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20160908105057&meid=bfcd97b7db6c43d7b9106d986461616d&pid=100675&rk=2&rkt=15&mehot=ag&sd=152148738326&itm=221101885073&pmt=1&noa=1&pg=2380057&brand=Unbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci:bfd69ba5-503a-11eb-aee6-3ed869ded0fb|parentrq:d87da70f1760ad4a4ceda718ffd8a56e|iid:1

    To replace the bulbs you have to remove the HVAC panel. Then remove the PCB from the housing and unsolder to old bulbs and solder in the new one in. If you can't removed the original green socks from the old bulbs and need to use new one you have to carefully cut off the ridge at the bottom of the new sock if they have ridges.
     
    Mike Morrissey, Qavion and 308 GTB like this.
  3. Carmellini

    Carmellini Formula Junior

    Jul 16, 2019
    814
    #3 Carmellini, Jan 6, 2021
    ^^^^ Exactly what I was looking for....Thank you very much.
     
  4. Carmellini

    Carmellini Formula Junior

    Jul 16, 2019
    814
    #4 Carmellini, Jan 6, 2021
    seems relatively simple, but before I dive in, are there any tips/tricks separating the unit? Do the knobs come off separately or are they part of the upper part of the housing?
     
  5. 285ferrari

    285ferrari Two Time F1 World Champ
    Sponsor

    Sep 11, 2004
    20,847
    Southern Md
    Full Name:
    Robbie
    #5 285ferrari, Jan 6, 2021
    We have done about 50 of them if you need someone to take care of it. Disassemble the panel and replace both bulbs. The bulbs must be soldered on.
     
  6. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,666
    CT
    Full Name:
    John Kreskovsky
    #6 johnk..., Jan 7, 2021
    Once you take the PCB out of the housing the rest is obvious. But it's best to use some desoldering braid to remove the solder from the old bulbs joints so the PCB hole are clear.The bulb is mounted on little standoffs.

    Image Unavailable, Please Login Google No-clean wick.

    If you like, send it to me. I'm in CT. I'll fix it for free just pay return shipping. I've done a bunch.
     
    308 GTB and Qavion like this.
  7. Carmellini

    Carmellini Formula Junior

    Jul 16, 2019
    814
    #7 Carmellini, Jan 7, 2021
    WOW....What an incredible offer.....will give it a try, but if I get in a jam, I will get in touch. Thank you again.
     
  8. taz355

    taz355 F1 Veteran
    Owner Silver Subscribed

    Feb 18, 2008
    5,969
    Indio Ca/ Alberta
    Full Name:
    Grant
    #8 taz355, Jan 9, 2021
    Hi John
    Could I send you my motor?
     
    Mike Morrissey likes this.
  9. johnk...

    johnk... F1 World Champ
    Owner

    Jun 11, 2004
    10,666
    CT
    Full Name:
    John Kreskovsky
    #9 johnk..., Jan 9, 2021
    Only if you don't want it back.
     
    taz355, Mike Morrissey, Qavion and 1 other person like this.

Share This Page