Conversion 430 centre lock hubs to 360

it's a kit bolt on pretty easy to install
https://capristoexhaust.com/product/ferrari-360-430-bbs-19-challenge-wheels-with-centerlock-conversion-kit/

Sent from my SM-N981U1 using Tapatalk

 

Some pics I took of my setup Image Unavailable, Please Login Image Unavailable, Please Login

Sent from my SM-N981U1 using Tapatalk

 

I don't think that will do what he wants if he is moving to challenge rotors. To do that, you need an equivalent hub. Even the 360 Challenge cars are 5 bolt, though the GTC spec cars are center lock. I am doubtful that the 430 challenge stuff is going to just bolt up to a 360. If the goal is a move to carbon brakes, I would stay in the 360 world and use Stradale parts or even an aftermarket solution like Alcon who will do custom stuff.

 

These adaptors work on 430 or 360 they bolt to the rotor hat comes with all hardware needed.

Sent from my SM-N981U1 using Tapatalk

 

When looking at a 430 challenge rotors they still have the same bolt pattern as the others.

Sent from my SM-N981U1 using Tapatalk

 

Now I am totally confused (and totally interested...)
The 430 challenge cars are all center lock. Are the rotors all 5 bolt? That would be a pit lane nightmare!

 

I know right it's kinda crazy when you think about it. I think what ferrari did is use the same rotor hats just didn't use the 5 bolts just the center lock.they do still have a bolt pattern so if bolting it to a 360 hub should work. Image Unavailable, Please Login

Sent from my SM-N981U1 using Tapatalk

 

To do it the right way you will need 4 hubs which cost around 1200 each. And 430 ccm brake caipers will work butbthe rotor is the tricky part due to the difference offset of the rotor hub on the challenge cars. Giro disc did a custom set on my buddy's car who did this conversion. Dont belive he is on here much but its completely different than the turaino kit .which not knocking that kit. This is the correct way to do it. Trev360 did I good right up.

 

That kit is no longer made. I tried to find it and they had a used display one available about a year ago.

 

Try ferrari of sanfransico maybe they have a kit left.
Image Unavailable, Please Login

Sent from my SM-N981U1 using Tapatalk

 

I did thats why kinda going a different way

 

So no one has them left?

Sent from my SM-N981U1 using Tapatalk

 

Why would you want a bolt in part to then put a CL wheel on. No offense intended.


Sent from my iPhone using FerrariChat.com mobile app

 

When I was in the market about a year ago for that kit I valled there direct hub in Florida and they said they never sold good and not in production any more
But they did have the display one for sale

 

Wow so the only option is to source challenge hubs that's deftly not cheap.

Sent from my SM-N981U1 using Tapatalk

 

I could be wrong but yes at this point. I do belive its the right way of doing it.

 

Aset of 2 or 4? $1500 for 4 is cheap here in the usa u will be luck to find a used one for $1200 to $1500 each.

Sent from my SM-N981U1 using Tapatalk

 

Look up gated360 on IG he did the conversion and have talked to him.you might need to change the bells on the rotors to the rear bells . Its kinda complicated but check his page out. He is rebuilding is motor now and its gonna rip.

 

On IG look up gated360