Black interior. My spec is quite basic compared to others here Exterior: Rosso Corsa Interior: Nero Options: - RSCH - LOGO - COLL (rosso) - CALY - RSFD - LEDS - RPMY - STC2 (rosso) - RVEN - CLDT (rosso) - PAC1 - PAR2 - ACPL - EXA3 - RSES - AFS1 - ELEV - FLMA - MIR3
My thoughts : Ditch the carbon side blades. Being the only carbon and other black parts ? All carbon or all plastic. The F8 by design has a narrower waste than the 488 GTB . People added carbon on the 488 GTB to narrow it as opposed to body colour. Black TACH just looks the part even though its standard given you have a red horse on the seat and a yellow badge in the middle of the horn. Think about the calipers . You didnt mention colour of wheels and std or Forges ? Im biased as i prefer aluminium calipers and wheels and center cap . This combination then doesnt clash with the car and shields. In my eyes the 5 spoke wheel is the classic wheel design.
Putting aside colors, your spec is very similar to mine - as I just went through this process and also asked for feedback. The following are some of the comments and suggestions that I felt were great insights. 1. I originally had the Apple Car Play but removed it and spent the $$$ on other options - see below. The consensus seemed to be that the Apple Car Play was not worth the expense. 2. I included SHF1 and ULEZ to help finish off the interior. These are two options that I would not have initially considered. These are both leather options for interior trim. You can also choose alcantara instead of leather. 3. I included OTCR - which is reverse stitching. Not a huge cost and I felt this helped to make the interior really stand out/pop. Just a fine detail. 4. Finally, it seemed like every build that I saw included EMPH - the horse stitching on the seats. Hope that this info helps.
This time I didn't include the horse embroidered on the headrest. Personal choice. Did get the 'skunk stripe' though. Image Unavailable, Please Login Image Unavailable, Please Login
I thought "COLL" was to have the upper part (close to windshield) of the bonnet in black, standard configuration being same body color. So what would be COLL (rosso) on a red car?
My bad, formatting was wrong when I pasted the text and I added the colors afterwards. COLL remains black of course; CLDT is red
Oh I didn't realize that the horse is stamped as standard. I still argue certain things should be standard.
Image Unavailable, Please Login Photo by: M.Auto Italia HD: https://scontent.fath3-3.fna.fbcdn.net/v/t1.0-9/146542365_4121092421236114_5628765678983884894_o.jpg?_nc_cat=111&ccb=2&_nc_sid=a26aad&_nc_ohc=SSlfiIro6K0AX9zkq97&_nc_ht=scontent.fath3-3.fna&oh=8ee48077a501345e553a2ebc5fa359bb&oe=6043DBA7
Gray with Diamond pattern on the outside Image Unavailable, Please Login Sent from my iPhone using Tapatalk
Your car is stunning I debated on those racing seats but went with black Daytona Racing Seats with Red Stitching and Red Horse. Sent from my iPhone using Tapatalk