400i Heater Valve and engine mount | Page 2 | FerrariChat

400i Heater Valve and engine mount

Discussion in '365 GT4 2+2/400/412' started by Astonish78, Jun 20, 2019.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

Page 2 of 2
  1. Arvid

    Arvid Formula Junior

    May 28, 2012
    668
    Norway
    Full Name:
    Arvid Andersson
    #26 Arvid, Mar 31, 2021
    Thanks Newman,I see what you mean. Several vendors offers it online and most pictures show this exact valve. I suspect it's what's available for the moment. As you say it would need some modification to lever end or switching over the original lever.
     
  2. raemin

    raemin Formula 3

    Jan 16, 2007
    1,854
    Lyon (FR)
    Full Name:
    R. Emin
    #27 raemin, Mar 31, 2021
    Is this is what you are talking about :


    No need to re-use the original one, in the RC hobby these are called Swivel Pushrod Connector. Will make your life easier as you just have to drill a hole in the lever. If you do not like the nut, Multiplex does offer variants with Circlips.

     
    Ak Jim likes this.
  3. Arvid

    Arvid Formula Junior

    May 28, 2012
    668
    Norway
    Full Name:
    Arvid Andersson
    #28 Arvid, Mar 31, 2021
    Great idea. I might have to order some of those :)
     
Page 2 of 2

Share This Page