F430 Trunk Fasteners missing | FerrariChat
Buy

F430 Trunk Fasteners missing

Discussion in '360/430' started by wklinez327, May 26, 2021.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. wklinez327

    wklinez327 Rookie

    May 26, 2021
    20
    Full Name:
    Warren Kline
    #1 wklinez327, May 26, 2021
    Can someone point me to a source for these fasteners that are missing from my trunk (red circles). If someone could take a high resolution image of the two bolts and bracket circled in red that would be great too. The factory service manual image is pretty low resolution. If I have to fabricate this part, it would nice to have a better image so I do it correctly.

    My local dealer says they can't even order the plastic fastener nor the bolts and bracket.

     
  2. ItalGerBrit

    ItalGerBrit Formula Junior

    Mar 15, 2016
    904
    S La
    #2 ItalGerBrit, May 26, 2021
    Last edited: May 26, 2021
    Will send photos shortly. The top-left button is plastic. Some sort of rivet. The middle metal bracket is not in my car and the others are big rubber access plugs like the one covering the hole to the roll over inertia switch.
    My car is a 360 so probably a bit different.
     
  3. ItalGerBrit

    ItalGerBrit Formula Junior

    Mar 15, 2016
    904
    S La
    #3 ItalGerBrit, May 26, 2021
    Pics of frunk. Not quite like yours.
     

    Attached Files:

    whatheheck likes this.
  4. ItalGerBrit

    ItalGerBrit Formula Junior

    Mar 15, 2016
    904
    S La
    #4 ItalGerBrit, May 26, 2021
    Those bolts are like all the other ones in the trunk. Like hex button heads with a built-in washer,
     
  5. Extreme1

    Extreme1 Formula 3

    Jun 27, 2017
    1,381
    Santa Clarita, CA
    #5 Extreme1, May 26, 2021
    I can’t see any of the pics for some reason, but if it’s the hex bolts with a washer type head, I bought mine at Ricambi. There are 3-4 different lengths.


    Sent from my iPhone using FerrariChat.com mobile app
     
  6. mike32

    mike32 F1 Veteran

    May 13, 2016
    5,918
    Isle of man- uk
    #6 mike32, May 27, 2021
    They are called flange head screws / bolts. E bay or amazon
     
  7. wklinez327

    wklinez327 Rookie

    May 26, 2021
    20
    Full Name:
    Warren Kline
    #7 wklinez327, May 27, 2021
    They are flange head screws but the part I'm most interested in is the green bracket they pass thru. It almost looks like its some sort of hanger. Why else would you need two screws so close together that are threaded into steel behind the plastic liner.
     
  8. wklinez327

    wklinez327 Rookie

    May 26, 2021
    20
    Full Name:
    Warren Kline
    #8 wklinez327, May 27, 2021
    thanks for the images. That spare tire setup is something!
     
  9. wklinez327

    wklinez327 Rookie

    May 26, 2021
    20
    Full Name:
    Warren Kline
    #9 wklinez327, May 27, 2021
    Thanks, I've sent a message to Ricambi for help.
     
  10. timwu12

    timwu12 Formula Junior

    Oct 31, 2014
    918
    TX
    #10 timwu12, May 27, 2021
    Last edited: May 27, 2021
    The plate is not a hanger, it's a rectangular washer used to sandwich the "leather" belt for the tool kit in the front. You can find a piece of scrap metal and cut a rectangular piece with 2 holes for the bolt holes and it'd be the same.

    As for the top left, the plastic snap fasteners took me forever to find when I needed to replace them. They're not cheap and sold separately as a male and female fitting so it doubles the price instead of being sold as a matched pair.

    Part numbers for these are: 66614100 and 66614200.
     
    whatheheck likes this.
  11. timwu12

    timwu12 Formula Junior

    Oct 31, 2014
    918
    TX
    #11 timwu12, May 27, 2021
  12. Marcoboxer

    Marcoboxer Formula Junior
    Silver Subscribed

    Oct 5, 2019
    293
    Alpharetta, GA
    Full Name:
    Mark Roberts
    #12 Marcoboxer, May 28, 2021
    I may have a couple of those. PM me.

    The pics we are having difficulty seeing look like they were airdropped from an iPhone to a Mac. They need uploading as JPG for people to see, or download them and they should pop up.
     
  13. wklinez327

    wklinez327 Rookie

    May 26, 2021
    20
    Full Name:
    Warren Kline
    #13 wklinez327, May 28, 2021
    Thanks for the great help on the part numbers. Its interesting about the tool kit. My tool kit is being held on the side. The air pump in the rear. The car did come with the large battery charger in a leather case. I'm wondering if that should be on the side and the tool kit in the front? So much to learn about my first Ferrari.
    Thanks I appreciate the offer but I went ahead and ordered a complete kit, since I need the leather strap as well.
     
    Marcoboxer likes this.

Share This Page